Home
Главная
Hotpoint-Ariston
Пылесос
SL C18 AAO
Инструкция по эксплуатации Страница: 13

Hotpoint-Ariston SL C18 AAO [13/16] Troubleshooting

Hotpoint-Ariston SL B16 AAO [13/16] Troubleshooting

hotpoint.co.uk

• The plug was not inserted or is not making contact.

• Change the dust bag. If large quantities of very ne dust/

powder are sucked up (e.g. our etc), the full dust bag

indicator may light up although the bag is not full yet. The

reason is that the Pure Clean dust bag is able to retain very

ne dust/powder particles, thus ensuring maximum hygiene.

• Clean the dust container in models without dust bag.

• Clean the lters and, if needed, replace them.

• Make sure the expansion pipe, exible hose and brush are

not blocked.

• Clean the lters and, if needed, replace them.

• Make sure the expansion pipe, exible hose and brush are

not blocked.

• Change the dust bag. If large quantities of very ne dust/

powder are sucked up (e.g. our etc), the Pure Clean dust

bag may become clogged.

• Clean the dust container and its lters.

• Battery not charged.

• The batteries were positioned incorrectly inside the battery

compartment. Position the two AAA batteries making sure of

the positive and negative poles.

• Remove batteries; then position them again, making sure of

the positive and negative poles.

• Electronic appliances or obstacles may be interfering or

shielding with the infrared signal.

• If very ne dust or powders are sucked up such as our, etc.

small electrostatic discharges could occur. When sucking

up materials previously mentioned, we advise not to use the

metal extension pipe, but only the plastic exible hose and

to set a low suction power level.

• One or more attachments were assembled incorrectly. Make

sure the lters and brushes were assembled according to

these instructions. In the model with dust bag make sure

that the gasket is correctly in place too.

• The dust bag/container is full. Replace the dust bag or clean

the dust container.

• Clean the lters and, if needed, replace them.

• The air regulator is open. Make sure it was closed correctly.

The vacuum cleaner cannot

be switched on.

The full dust bag/container

indicator lights up although

it is not full yet.

Low suction power.

Remote Power not working.

Small electrostatic

discharges occur while

sucking up.

The vacuum cleaner whistles

or vibrates when in use.

TROUBLESHOOTING

Problem Possible causes / Solutions

Hotpoint-Ariston SL C18 AAO [13/16] Troubleshooting

Содержание

Похожие устройства