Hotpoint-Ariston SL B16 AAO [13/16] Troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston SL B16 AAO [13/16] Troubleshooting

Hotpoint-Ariston SL B16 AAO [13/16] Troubleshooting
12
en
hotpoint.co.uk
• The plug was not inserted or is not making contact.
• Change the dust bag. If large quantities of very ne dust/
powder are sucked up (e.g. our etc), the full dust bag
indicator may light up although the bag is not full yet. The
reason is that the Pure Clean dust bag is able to retain very
ne dust/powder particles, thus ensuring maximum hygiene.
• Clean the dust container in models without dust bag.
• Clean the lters and, if needed, replace them.
• Make sure the expansion pipe, exible hose and brush are
not blocked.
• Clean the lters and, if needed, replace them.
• Make sure the expansion pipe, exible hose and brush are
not blocked.
• Change the dust bag. If large quantities of very ne dust/
powder are sucked up (e.g. our etc), the Pure Clean dust
bag may become clogged.
• Clean the dust container and its lters.
• Battery not charged.
• The batteries were positioned incorrectly inside the battery
compartment. Position the two AAA batteries making sure of
the positive and negative poles.
• Remove batteries; then position them again, making sure of
the positive and negative poles.
• Electronic appliances or obstacles may be interfering or
shielding with the infrared signal.
• If very ne dust or powders are sucked up such as our, etc.
small electrostatic discharges could occur. When sucking
up materials previously mentioned, we advise not to use the
metal extension pipe, but only the plastic exible hose and
to set a low suction power level.
• One or more attachments were assembled incorrectly. Make
sure the lters and brushes were assembled according to
these instructions. In the model with dust bag make sure
that the gasket is correctly in place too.
• The dust bag/container is full. Replace the dust bag or clean
the dust container.
• Clean the lters and, if needed, replace them.
• The air regulator is open. Make sure it was closed correctly.
The vacuum cleaner cannot
be switched on.
The full dust bag/container
indicator lights up although
it is not full yet.
Low suction power.
Remote Power not working.
Small electrostatic
discharges occur while
sucking up.
The vacuum cleaner whistles
or vibrates when in use.
TROUBLESHOOTING
Problem Possible causes / Solutions

Содержание

Похожие устройства

Скачать