Loewe Xelos A 26 — инструкция по автоматической настройке телевизора [13/46]
![Loewe Xelos A 32 [13/46] Automatic programming](/views2/1020401/page13/bgd.png)
13 -
First installation
Automatic programming
Automatic programming of the TV set is started the first time you switch it on. Follow
the menus.
Settings can be selected by pressing one of the directions ...
... and confirm your settings by pressing OK. You then go to the
next menu.
Back to the previous menu.
1. First you have to select the menu language.
2. By pressing the OK button, you can call the menu “Connect antenna cable(s)“. If
you want to receive digital stations via satellite, then choose “DVB-S“ - confirm
using the yellow coloured key. If you also want to receive digital terrestrial
stations (DVB-T), then select “DVB-T“.
Also select “Antenna/cable (analo-
gue)“ - this way the standard analo-
gue stations can also be searched for
and saved. If you can receive digital
stations from the cable network, then
select “DVB-C“ using the yellow
coloured key.
3. For the country-specific station sorting and for presettings for DVB-T and DVB-C,
enter the location at which the TV set is operated.
4. If you have selected “DVB-T“, you then reach the menu “Antenna
DVB-T“. If you use an active antenna, then select “yes (5V)“.
5. If you have selected “DVB-C“, you generally leave the symbol rates and modulati-
on types unchanged.
If other symbol rates are used in your cable network for broadcasting, enter the
values with the numeric buttons of the remote control. If only one symbol rate is
used, enter the same value for both symbol rates. If other modulation types are
used for broadcasting in your cable network, select them in the menu. If only one
modulation type is used, select “none“ for modulation type 2.
If necessary, ask your specialist dealer about the necessary settings for your cable
network.
6. In the “Select satellite installation“ menu, make the selection that corresponds to
your satellite antenna installation.
Note: If you have any questions on how your satellite antenna installation is
configured and on the antenna settings, consult your antenna installer or your
specialist dealer.
7. Select the satellite the antenna is directed at, such as ASTRA1.
If you only receive one satellite...
8. In the following menu, specify whether the station search should take place in the
high and low band (“Yes“) or only in the low band (“No“).
Note: For most satellites, a station search is required in both bands.
9. For the low band and high band, the standard frequencies 9750 MHz (9.75 GHz)
and 10600 MHz (10.6 GHz) are preset.
If your satellite antenna is equipped with an LNC (LNB) with a divergent oscillator
frequency, specify the corresponding frequency for low and high band respective-
ly.
Note: The correct display of the received frequencies in the “TV menu – Settings
– Channels – Manual adjustment“ depends upon this setting.
10. You should receive a picture with sound with the settings previously made (only
for ASTRA 1 and HOTBIRD). Then press OK.
11. In the “Pre-programming“ menu, select the factory-set pre-programming to
programme the satellite stations quickly.
To ensure all stations that can be currently received are searched for and saved,
select “No“ at this point.
Symbol rates: The standard symbol rates 22000 and 27500 are preset. If you
would like to receive stations with different symbol rates, specify the correspon-
ding values here using the numeric buttons on your remote control.
12. Press OK to obtain an overview of the settings with which the automatic pro-
gramming is to take place.
13. Press the OK button again and the station search will start. The TV set searches
for, sorts and saves all the TV stations that can be received, according to your
settings and the antennas connected.
14. When the TV stations are saved, you will receive a corresponding message.
15. Press the OK button and the set then searches for the radio stations.
16. The TV set searches for, saves and sorts all radio stations which can be received
with your antenna system.
17. Then log on your video equipment, decoder and audio system using the connec-
tion wizard and connect these to the TV according to the connection diagram
displayed. If you want to connect other equipment later, you can find information
as of page 32.
You can repeat the initial installation at any time, e.g. after moving house. Call the
index using the INFO button (in the TV mode, if no menu is opened). Select the index
item “Repeat initial installation“ (you will find this listed separately before the letter
A). Press OK to start the initial installation.
Note: For DVB-T stations in UK the stations are tied to “Logical Channel Numbers”
– “LCN” and sorted from 1–799. Digital station without “LCN” are stored from 800
onwards. Analogue stations are stored from1001.
Station sorting
Note: not with DVB-T stations in UK.
You can change the station sorting that was carried out automatically later at any
time, see “TV menu – Settings – Stations – Change stations“.
Initial installation
Connect antenna cable(s)
Proceed
Back
OK
Connect/disconnect
Antenna cable(s) for: to antenna socket(s):
Antenna/cable (analogue) ANT TV
DVB-T ANT TV
DVB-C ANT TV
DVB-S ANT SAT
BA32789_021XelosModusRel_5_GB.in13 13BA32789_021XelosModusRel_5_GB.in13 13 15.01.2007 16:54:0415.01.2007 16:54:04
Содержание
- Operating instructions p.1
- Contents p.2
- Remote control tv functions p.3
- Control unit p.4
- Connections to rear panel xelos a 26 p.5
- Connections to rear panel xelos a 32 37 and modus l 32 37 p.6
- Connections to rear panel xelos a 42 and modus l 42 p.7
- Installation options p.8
- Transporting p.8
- Scope of delivery p.8
- Integrated features p.8
- Welcome p.8
- Thank you p.8
- Note on the lcd screen p.8
- Welcome p.9
- Note on the plasma screen xelos a 42 and modus l 42 p.9
- Disposal p.9
- Cleaning p.9
- For your safety p.10
- Xelos a42 modus l42 p.11
- Remote control p.11
- Ant tv ant sat 220 240v 50 60hz p.11
- Xelos a 26 p.11
- First installation p.11
- Connection p.11
- Ba32789_021xelosmodusrel_5_gb in11 11 ba32789_021xelosmodusrel_5_gb in11 11 15 1 007 16 53 59 15 1 007 16 53 59 p.11
- Using the conditional access module p.12
- Use of the binders for xelos a42 and modus l 42 p.12
- Switching on p.12
- First installation p.12
- Automatic programming p.13
- First installation p.13
- Directing dvb t antenna p.14
- Daily operation p.14
- Switching on off p.14
- First installation p.14
- Daily operation p.15
- Changing stations p.15
- Daily operation p.16
- Basics about the menu operation p.16
- Use to select the line below for example search wizard p.17
- The info text indicates which settings you can make in stations p.17
- The info text explains how you are to proceed upon delivery the tv set is configured so that the info texts are always displayed automatic info yes in this case you can hide the info texts by using the info button you can also configure the tv set so that you call the info texts when needed by using the info button automatic info no you can find the setting to switch the automatic info option on or off via tv menu under settings miscellaneous on screen displays automatic info yes no p.17
- Select settings p.17
- In this example you can see the options available after settings p.17
- If you want to search for new stations for example use to select stations in the line below p.17
- For the info system p.17
- For each menu point an info text is displayed at the top of the picture to help you with the setting this saves you from having to refer back to the operating instruc tions we shall demonstrate this using the station search option as an example p.17
- Daily operation p.17
- Call the tv menu p.17
- For the index p.18
- Daily operation p.18
- Setting the sound p.19
- Picture settings p.19
- Direct control on tv set p.19
- Daily operation p.19
- Operating modes tv p.20
- Operating modes tv p.21
- Operating modes tv p.22
- Operating modes tv p.23
- Image is a picture improvement specially developed by loewe which delivers a sharper lifelike and colour fast picture richer in detail and contrast image is not integrated in the xelos a26 32 sets p.24
- Image demo mode in order to show the way image works a demo mode is integrated in demo mode the current picture is divided into two parts the left half of the picture is shown in normal mode the right half in the image optimised mode p.24
- Call up tv menu p.24
- Call up more with ok and mark image with p.24
- Call the menu additional functions p.24
- And use to select set and use p.24
- Use to move to the corresponding selection setting p.24
- Use to mark picture p.24
- Use to access the associated selection set as described in the image menu above p.24
- Use for associated selection and mark more with p.24
- To activate p.24
- The standard setting at delivery of the set is image on p.24
- The image settings can also be opened via the tv menu picture p.24
- The demo mode can be closed by pressing on any button on the remote control p.24
- Operating modes tv p.24
- In the image menu the functions image on off and demo can be set p.24
- Image menu p.24
- Picture in picture pip p.25
- Operating modes pip p.25
- Operating modes pip p.26
- Operating modes epg p.27
- Epg programme guide p.27
- Operating modes epg p.28
- Operating modes teletext p.29
- Analogue teletext p.29
- Operating modes teletext p.30
- Operating modes radio p.31
- Operating additional equipment p.32
- Login and connect equipment p.32
- Video playback p.33
- Timer recording with video or dvd recorder p.33
- Operating additional equipment p.33
- Operating additional equipment p.34
- Assignment of digital audio inputs and outputs p.34
- Se rv ic e p.35
- Center p.35
- Cente r p.35
- Bass intensity p.35
- Av 2 scar t p.35
- You can play audio signals from the tv or dvd player in cinema quality with these components in addition to the subwoofer illustrated below the individual sound system includes up to 5 loudspeakers for the front center and surround reproduc tion the centre signal can be reproduced alternatively by the tv speakers connect the cubic socket on the dvd preceiver to the master cubic socket on the subwoofer use the cubic plug cable enclosed with the dvd preceiver plug the white plug without kink protection into the cubic socket on the subwoofer for tv as a centre loudspeaker connect audio in c on the tv set to pre out c on the dvd preceiver using a cinch cable connect the digital audio output of the tv p.35
- V 50 60hz p.35
- System connector p.35
- Set audio digital out to the digital in input of the preceiver using a cinch cable connect the tv socket service to the tv l link socket on the preceiver using the l link cable provided with the preceiver switch on the tv set and the preceiver via the l link the tv recognises whether the preceiver is connected select the tremo loudspeaker system in the dvd menu of the preceiver set the listener speaker distances and adjust the speaker levels please consult the preceiver manual if you want to listen to the sound via the tv speakers temporarily call the sound menu select sound via and then tv if you want to listen to the sound via the loewe auro system select auro under sound via p.35
- Phase min max p.35
- Operating additional equipment p.35
- Master p.35
- Digi ta l ou t p.35
- Connecting loewe dvd preceiver auro 2216 ps and individual sound loudspeaker system p.35
- Center to p.35
- Operating additional equipment p.36
- Connecting other audio amplifiers or active speakers p.36
- Vga xga connection p.37
- Operating additional equipment p.37
- Hdmi dvi connection p.37
- Operating additional equipment p.38
- Component video connection p.38
- Use the remote control to operate one of the dvd players p.39
- Use the remote control to operate a recorder press the rec button the display above will light up for approx 5 seconds p.39
- Set remote control the specified key combination must be pressed approx 5 s until one of the leds flashes twice the remote control can be set for the different devices as follows p.39
- Return to using the remote for the tv p.39
- Press tv button p.39
- Press the dvd button the display above will light up for approx 5 seconds p.39
- Operating additional equipment p.39
- Operate loewe dvd player and recorder with the remote control p.39
- Loewe viewvision 8106 h p.39
- Loewe tv chassis l2650 loewe centros 11x2 p.39
- Loewe centros 12x2 21x2 factory setting loewe viewvision dr p.39
- Loewe auro 2216 ps 8116 dt loewe xemix 6222 ps p.39
- Functions for the loewe dvd player auro 2216 ps 8116 dt functions for the loewe dvd recorders centros 12x2 21x2 viewvision dr p.39
- Device hot keys p.39
- What to do if p.40
- What to do if p.41
- General data p.42
- Technical data p.42
- Technical data p.43
- The code number 3001 cancels out a secret code and with it the child lock please keep in a safe place p.43
- Electrical data p.43
- Accessories p.44
- Retrofitting options p.45
- Accessories p.45
- Service addresses p.46
Похожие устройства
-
Loewe BluTech VisionИнструкция по эксплуатации -
Loewe Art 32 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 47 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 42 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 37 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Spheros 20Инструкция по эксплуатации -
Loewe Xelos A 42 HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 42Инструкция по эксплуатации -
Loewe Xelos A 37 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 37Инструкция по эксплуатации -
Loewe Xelos A 32 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 32Инструкция по эксплуатации
Узнайте, как правильно выполнить автоматическую настройку телевизора с помощью простых шагов. Следуйте инструкциям для выбора языка, подключения антенны и настройки каналов.