D-Link DI-714P+ [9/84] Ip address

With a single IP Address from your Broadband Internet Service provider you

can share the Internet with all the computers on your local network, without

sacrificing speed or security, using D-Link Air networking products.

Getting Started

An Infrastructure wireless network contains an Access Point. The

Infrastructure Network example, shown here, contains the following D-Link

network devices:

A wireless Broadband Router - D-Link AirPlus DI-714P+

A laptop computer with a wireless adapter - D-Link AirPlus DWL-650+

A desktop computer with a wireless adapter - D-Link AirPlus DWL-520+

A Cable modem - D-Link DCM-200

If you need to assign IP Addresses to the computers on the network,

please remember that the IP Address for each computer must be in

the same IP Address range as all the computers in the network, and

the Subnet Mask must be exactly the same for all the computers in the

network.

For example: If the first computer is assigned an IP Address of

192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second

computer can be assigned an IP Address of 192.168.0.3 with a Subnet

Mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same

IP Address, one or more of the devices may not function properly

on the network.

IP ADDRESS

Note: If you are using a DHCP-capable router in your network setup,

such as the DI-714P+, you will not need to assign a static IP Address.

With its default settings, the DI-714P+ will connect with other

D-Link Air or AirPlus products, right out of the box.