M-Audio Ozone Инструкция по эксплуатации онлайн [29/48] 19709

Active Channels: A box that is checked indicates that a channel pair is

set to “Active.” Unchecking a box will deactivate that channel pair.When

the Control Panel is installed, both Inputs 1 & 2 and Outputs 1 & 2 are set

to “Active” by default.

Sample Depth: The default Sample Depth setting is “16-bit.” When the

Sample Depth is set to 16-bit, then your music recording software will only

allow you to record at 16-bit or lower. If you wish to record at a higher

Sample Depth (sometimes referred to as Bit Depth or Bit Width), change

this setting to “24-bit.”

Maximum Sample Rate: When both channel pairs are checked and

active, the Maximum Sample Rate will show a reading of 48000 (samples

per second). When either of the channel pairs is unchecked and

deactivated, the Maximum Sample Rate will show a readout of 96000.This

number represents the maximum sample rate at which your music

software will record (due to the limitations of the USB bus).

Latency: The amount of time it takes for audio to be converted to digital

information, processed by the system, and converted from digital back to

an analog audio signal is referred to as “Latency.” The M-Audio Ozone’s

audio driver plays a role in that latency, so overall latency can be affected

by your setting in the M-Audio Ozone Panel.

The more robust your system (a combination of processing power and

RAM), the lower the latency setting that it can handle.The default setting

is “medium.” After recording and playing back some audio, if you find that

the system seems to choke and stutter, or give you undesirable and audible

results such as crackling, try changing the Latency box to a higher setting.

Version Numbers: These numbers indicate the software version that is

currently loaded and in use. Shown are Preference Panel, USB Driver, and

Firmware version numbers.