M-Audio Ozone [31/48] M audio ozone audio setup and control

sure that the M-Audio Ozone audio driver is set to “M-Audio Ozone ASIO.”

Within your music application, when you assign an audio track to receive

its input from the M-Audio Ozone Channel 1 or Channel 2—whether it’s

the Mic In and Instrument In, or when using the Aux Inputs in “Record”

mode—you will set the input device to:

• In a non-ASIO application, possible choices will be “Ozone-L,” “Ozone-

R,” or “Ozone Stereo.”

• In an ASIO application, your input choices will be “Ozone ASIO 1” and

“Ozone ASIO 2.”

Your audio device output selection, in either a non-ASIO or an ASIO

application, will be “Ozone 1/2.”

M-Audio Ozone Hardware Installation

Installing your M-Audio Ozone involves simply attaching it to your

computer’s USB port via the standard USB cable included with the

product. Find a good spot around your computer station to place the

M-Audio Ozone. The USB port on your computer is a small, rectangular

connector and is usually found in a group of two. The “device end” of your

USB cable is roughly square in shape, and should fit easily into the USB

connector on your M-Audio Ozone.Take the “computer end” of the USB

cable and plug it into the USB port on the back of your computer.Take the

“device end” of the USB cable and plug it in to the USB port on the back

panel of the M-Audio Ozone.

We recommend that you power down (turn off) your computer for a first

time installation. Plug in the M-Audio Ozone using the supplied power

adapter and turn on the power.

The audio outputs of the M-Audio Ozone should be connected to your

audio monitoring system: a mixer, an audio receiver, or a pair of powered

speakers. Further audio and MIDI connection instructions will be found in

the following sections,“M-Audio Ozone MIDI Setup” and “M-Audio Ozone

Audio Setup.”

M-Audio Ozone Audio Setup and Control

The M-Audio Ozone provides two inputs (Mic and Instrument), and two

line outputs (Output 1 and 2).The M-Audio Ozone also provides a pair of

Aux Inputs which can be used to monitor external gear, or can double as

line inputs when switched to “Record” mode.A Headphone Out on a 1/4”

stereo TRS jack is included for monitoring with headphones.