M-Audio Ozone Инструкция по эксплуатации онлайн [42/48] 19709

5. Press the CC Data key.

6. Press the number keys 1, 2 and 3, in order.

7. Press the Enter key, to specify the value 123, then press the

MIDI/SELECT button.This completes the process.

Program Key: By pressing the MIDI/SELECT button and the Program key,

then numeric keys, and finally the Enter key, you can select any patch

number between 1 and 128. For example, if you want to change the voice

to 67 (General MIDI TenorSax), Press the MIDI/SELECT button and 6, 7 on

the numeric keys, then press the enter key and MIDI/SELECT button again

to finish this action.

Please note: After you press the enter key, the LED display will show

“—-“ and will not disappear until you press the MIDI/SELECT button

to finish your choice. After you press the Cancel key, the LED display

will also show blank, and will not disappear until you press the

MIDI/SELECT button to finish your choice.

Presets: The M-Audio Ozone can save five Presets in memory.This allows

you to assign 8 controller values to the faders and knobs in one Preset, and

then assign 8 different values to those same faders and knobs. In this

manner, you may change settings without losing your current settings. To

change Presets, press the MIDI/SELECT button, then the UP/DOWN

buttons, choosing the desired Preset from the five Preset banks available.

The display will read “P1” through “P5” while you are changing Presets.

The chart on the next page lists the factory default Presets, useful in a variety

of software programs and performance scenarios.These default Presets use

the Preset memory banks 1 through 5. Banks 1 through 5 are not write-

protected and so when applying the above method of editing and saving

customized Presets according to your wants and needs, they can be written

over. If you ever wish to restore the factory default Presets, simply hold

down the MIDI/Select button while powering up your M-Audio Ozone.