Tp-Link TX-VG1530 [18/135] Connecting the gpon router

TX-VG1530

N300 Wireless VoIP GPON Router User Guide



Note:

The diameter of the screw, 3.6mm<D<8mm, and the distance of two screws is 152.37mm. The

screw that project from the wall need around 4mm based, and the length of the screw need to be

at least 20mm to withstand the weight of the product.

2.3 Connecting the GPON router

Before installing the device, please make sure your broadband service provided by your ISP is

available. If there is any problem, please contact your ISP. Before cable connection, cut off the

power supply and keep your hands dry. You can follow the steps below to install it.

Step 1: Connect the Fiber to the optical port of the GPON router TX-VG1530.

Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the

GPON routerTX-VG1530.

Step 3: Connect your telephone to the Port labeled “PHONE 1/2” on the GPON router with a

telephone line.

If you want to share files or use the USB Voice Mail function, please plug an external USB hard

drive/USB flash disk into the USB port. To use the printer function, please connect a USB printer

to the USB port.

To use USB Voice Mail function, please make sure the free space of the plugged external USB

hard drive/USB flash disk is more than 4MB.

Step 4: Power on the computers and LAN devices.

Step 5: Attach the power adapter. Connect the power adapter to the power connector on the rear

of the device and plug in the adapter to an electrical outlet or power extension. The

electrical outlet shall be installed near the device and shall be easily accessible.