Aten CS782DP [10/20] Installation

- 10 -

Installation

1. Plug your keyboard and mouse into the console Keyboard/

Mouse ports located on the front side of the CS782DP. The

ports are labeled with icons with the mouse port on the top

and the keyboard port on the bottom.

Note: The console mouse connector is a USB 2.0 port and so

can accept any USB compatible peripheral. You can even

connect a hub to install multiple USB devices (this feature

may require an extra power adapter to be connected to

the USB hub and that the CS782DP’s Mouse Emulation

Mode be disabled). See Hotkey Summary Table, page 14

for information.

2. Plug your monitor into the DisplayPort port, located on the

front of the CS782DP. Power on the monitor.

3. Plug your speakers into the console audio port, located on

the front of the CS782DP (Optional).

4. Plug the USB, video and audio connectors of the KVM cables

into their respective PC ports on the CS782DP.

5. Plug the USB, video and audio connectors of the KVM cables

into their respective ports on the computers you are installing.

6. If you choose to use the remote port selector, plug its cable

into the remote port selector female jack, located on the front

of the unit.

7. Power on the computers.

1. Make sure that the power to any device that you

connect to the installation has been turned off. You

must unplug the power cords of any computers that

have the Keyboard Power On function.

2. Make sure that all devices you will be installing are

properly grounded.