![Aten VS0801A [33/51] Ddc on enter](/img/pdf.png)
Aten VS0801A [33/51] Ddc on enter
![Aten VS0801A [33/51] The formula for the dynamic ddc command is as follows](/views2/1211488/page33/bg21.png)
Chapter 3. Operation
24
Dynamic DDC Commands
The Dynamic DDC command is used to monitor the connected display and
provide the correct updated EDID information to the source devices so that the
display is optimized. With Dynamic DDC off, source devices do not receive
updated EDID data which can cause display issues. If there is a problem with
your display quality when Dynamic DDC is on, it is recommended that
Dynamic DDC be turned off.
The formula for the Dynamic DDC command is as follows:
1. Dynamic DDC Command + Control Command [Enter]
For example, to turn Dynamic DDC on, type the following:
ddc on [Enter]
The following tables show the possible values for the Dynamic DDC, and
Control commands:
The following table shows the available command list:
Note: Each command string can be separated with a space.
Command Description
ddc Dynamic DDC command
Control Description
on Turn on
off Turn off (default)
Command Control Enter Description
ddc on [Enter] Enable Dynamic DDS
ddc off [Enter] Disable Dynamic DDS (default)
Содержание
- Vs0801a p.1
- Vs0801a user manual p.1
- Fcc information p.2
- The following contains information that relates to china p.3
- Sj t 11364 2006 p.3
- User notice p.4
- User information p.4
- Telephone support p.4
- Online registration p.4
- Package contents p.5
- Operation p.6
- Introduction p.6
- Hardware setup p.6
- Contents p.6
- The firmware upgrade utility p.7
- Appendix p.7
- About this manual p.8
- This manual uses the following conventions p.9
- Product information p.9
- For information about all aten products and how they can help you connect without limits visit aten on the web or contact an aten authorized reseller visit aten on the web for a list of locations and telephone numbers p.9
- Conventions p.9
- Overview p.10
- Introduction p.10
- Chapter 1 p.10
- Features p.11
- Source device p.12
- Requirements p.12
- Display device p.12
- Cables p.12
- Vs0801a front view p.13
- Components p.13
- Vs0801a rear view p.14
- Ir remote control p.15
- Stacking and rack mounting p.16
- Stacking p.16
- Hardware setup p.16
- Chapter 2 p.16
- Rack mounting p.18
- Installation p.22
- The optional port switching vga cable shown above provides a high quality vga cable with port switching button to switch the vs0801a to the source device it is connected to when pressed this optional accessory is installed between the vs0801a and a source device as shown in step 2 the port switching vga cable can be purchased separately from your local aten dealer p.23
- Optional port swtiching vga cable p.23
- Installation diagram p.23
- Chapter 2 hardware setup p.23
- Source selection p.24
- Overview p.24
- Operation p.24
- Chapter 3 p.24
- Pushbutton lock p.26
- Auto switch p.26
- Verification p.28
- Rs 232 serial interface p.28
- Configuring the serial port p.28
- The formulas for switch port commands are as follows p.29
- The following tables show the possible values for the switch input port number and control commands p.29
- The following table shows the available command list p.29
- Switch port commands p.29
- Switch command input command port number enter p.29
- Switch command control enter p.29
- Sw i02 enter p.29
- Sw enter p.29
- Note 1 each command string can be separated with a space p.29
- If the port number string is skipped the default value is used p.29
- For example to switch to the next input port type the following p.29
- For example to switch to input port 02 type the following p.29
- Auto switch commands p.30
- The following table shows the available command list p.31
- Note 1 each command string can be separated with a space p.31
- If the port number string is skipped the default value is used p.31
- When the vs0801a is turned on the last port connected when the device was turned off will be automatically selected p.32
- When power on detection is turned on it does the following p.32
- The formula for the power on detection command is as follows p.32
- The following tables show the possible values for the power on detection and control commands p.32
- The following table shows the available command list p.32
- Power on detection commands p.32
- Pod off enter p.32
- Pod command control command enter p.32
- Note each command string can be separated with a space p.32
- For example to turn off power on detection type the following p.32
- Automatically switches to the next port with a powered on source device when the current active port device is powered off p.32
- Dynamic ddc command control command enter p.33
- Ddc on enter p.33
- The formula for the dynamic ddc command is as follows p.33
- The following tables show the possible values for the dynamic ddc and control commands p.33
- The following table shows the available command list p.33
- The dynamic ddc command is used to monitor the connected display and provide the correct updated edid information to the source devices so that the display is optimized with dynamic ddc off source devices do not receive updated edid data which can cause display issues if there is a problem with your display quality when dynamic ddc is on it is recommended that dynamic ddc be turned off p.33
- Note each command string can be separated with a space p.33
- For example to turn dynamic ddc on type the following p.33
- Dynamic ddc commands p.33
- The pushbutton lock command allows you to secure your device by locking use of the front panel pushbuttons p.34
- The formula for the pushbutton lock command is as follows p.34
- The following tables show the possible values for the button and control commands p.34
- The following table shows the available command list p.34
- Pushbutton lock commands p.34
- Note each command string can be separated with a space p.34
- For example to lock the front panel pushbuttons type the following p.34
- Button off enter p.34
- Button command control command enter p.34
- The formula for the cable button command is as follows p.35
- The following tables show the possible values for the cable and control commands p.35
- The following table shows the available command list p.35
- The cable button command allows you to turn on and off the port switching vga cable button function see vga cable source selection page 16 for the vs0801a p.35
- Note each command string can be separated with a space p.35
- For example to turn off the vga cable button function type the following p.35
- Cable off enter p.35
- Cable command control command enter p.35
- Cable button commands p.35
- The following table shows the available command list p.36
- Note each command string can be separated with a space p.36
- Ircode 00fd enter p.36
- Ir code commands p.36
- Ir code command control command enter p.36
- If you purchased a new ir remote control you may need to change the ir code of the switch to match that of the new remote try all three codes until the ir remote control works with the switch p.36
- For example to change the ir code to 00fd type the following p.36
- The formula for the ir code command is as follows p.36
- The following tables show the possible values for the cable and control commands p.36
- The read firmware command allows you to read the firmware information p.37
- The formula for the read firmware command is as follows p.37
- The following tables show the possible values for the read and control commands p.37
- The following table shows the available command list p.37
- Read version enter p.37
- Read firmware command p.37
- Read command control command enter p.37
- Note each command string can be separated with a space p.37
- For example to display the firmware information type the following p.37
- Reset enter p.38
- Reset command enter p.38
- Reset command p.38
- Note each command string can be separated with a space p.38
- For example to reset the device type the following p.38
- The reset command sets the device back to the factory default settings p.38
- The formula for the rest commands is as follows p.38
- The following tables show the possible values for the reset command p.38
- The following table shows the available command list p.38
- Powering off and restarting p.39
- This page intentionally left blank p.40
- The firmware upgrade utility p.41
- Introduction p.41
- Downloading the firmware upgrade package p.41
- Chapter 4 p.41
- Preparation p.42
- Starting the upgrade p.43
- Upgrade succeeded p.45
- Upgrade failed p.45
- Firmware upgrade recovery p.46
- Appendix p.47
- Safety instructions p.47
- General p.47
- Technical support p.49
- North america p.49
- International p.49
- Vs0801a user manual p.50
- Specifications p.50
- The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions or update for further inquiries please contact your direct vendor p.51
- Limited warranty p.51
Похожие устройства
-
Aten VS201Руководство пользователя -
Aten VS201Описание и спецификации продукта -
Aten VS881Руководство пользователя -
Aten VS881Описание и спецификации продукта -
Aten VS881Краткое руководство по установке -
Aten VS231Описание и спецификации продукта -
Aten VS231Краткое руководство по установке -
Aten VS491Руководство пользователя -
Aten VS491Описание и спецификации продукта -
Aten VS291Руководство пользователя
-
Aten VS291Описание и спецификации продукта
-
Aten VS461Руководство пользователя