![Aten VM6404H [5/119] Package contents](/img/pdf.png)
Aten VM6404H [5/119] Package contents
![Aten VM6404H [5/119] Package contents](/views2/1211647/page5/bg5.png)
VM6404H User Manual
v
Package Contents
The VM6404H package consists of:
1 VM6404H 4 x 4 4K HDMI Matrix Switch with Scaler
1Power Cord
1 IR Remote Control
1 IR Receiver
1 Mounting Kit
1 User Instructions*
Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.
* Features may have been added to the VM6404H since this manual was
published. Please visit our website to download the most up-to-date version.
© Copyright 2016 ATEN® International Co., Ltd.
Manual Date: 2016-06-17
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
Содержание
- Vm6404h user manual 1
- Emc information 2
- Safety 3
- Sj t 11364 2006 3
- The following contains information that relates to china 3
- This product has been classified as information technology equipment 3
- Online registration 4
- Telephone support 4
- User information 4
- User notice 4
- Package contents 5
- Chapter 1 6
- Chapter 2 6
- Chapter 3 6
- Contents 6
- Front panel configuration 6
- Hardware setup 6
- Introduction 6
- Browser operation 7
- Chapter 4 7
- Appendix 9
- Chapter 5 9
- Rs 232 commands 9
- About this manual 10
- Conventions 11
- For information about all aten products and how they can help you connect without limits visit aten on the web or contact an aten authorized reseller visit aten on the web for a list of locations and telephone numbers 11
- Product information 11
- This manual uses the following conventions 11
- This page intentionally left blank 12
- Chapter 1 13
- Introduction 13
- Overview 13
- Features 14
- Cables 15
- Display devices 15
- Requirements 15
- Source devices 15
- Browsers 16
- Source device operating systems 16
- Supported operating systems are shown in the table below 16
- Supported web browsers are shown in the table below 16
- Components 17
- Vm6404h front view 17
- Vm6404h rear view 18
- 4 output pushbuttons 19
- Ir remote control 19
- The vm6404h s ir remote control only supports use the 1 4 input and 19
- This page intentionally left blank 20
- Chapter 2 21
- Hardware setup 21
- Rack mounting 21
- Grounding 22
- Cable connection 23
- Installation diagram 24
- Vm6404h user manual 24
- Chapter 3 25
- Front panel configuration 25
- Front panel pushbuttons 25
- Overview 25
- Enter password 26
- Input port selection 27
- Main screen 27
- Port switching 27
- Output port selection 29
- Chapter 3 front panel configuration 31
- Lcd menu organization 31
- Note the highlighted values are the default settings of the vm6404h 31
- The vm6404h has a built in configuration utility via the front panel lcd which can be controlled by pressing the menu and front panel input pushbuttons user can cycle through the menu options starting from ip setting page in the order shown in the table below 31
- Ip address subnet mask 32
- Ip setting 32
- Menu pushbutton 32
- Gateway 33
- Baud rate 34
- Serial port setting 34
- Edid mode 35
- Operation mode 35
- Output status 38
- Security mode 40
- Change password 41
- Save to a profile 42
- Play stop the profile schedule 43
- Turn video wall off 43
- Profile pushbutton 44
- Change the input source of an output display 45
- Ir remote control operation 45
- Power on off individual output displays 45
- Power on off all output displays 46
- Browser operation 47
- Chapter 4 47
- Logging in 47
- Overview 47
- Main page 48
- Menu bar 48
- Adding playing a profile 49
- Profile list 49
- Importing exporting a profile 51
- Profile list options 52
- Play window 53
- Profile 53
- Profile scheduling 55
- Profile scheduling is located below the profile list scheduling allows you to queue and play connection profiles in sequence for a specific amount of time 55
- After selecting edit you will be presented with the following options 56
- Connection profiles 57
- Digital signage profile 57
- Output icon 58
- Select source 58
- Grid view 59
- Output options 59
- Video wall options 60
- Video wall profile 60
- Number of displays output order bezel dimensions 61
- Independent output 62
- Null input 62
- Grouping 63
- Display preferences 64
- Each group and independent output has a unique color 64
- This video wall has 1 group and 2 independent displays 64
- Video wall example 64
- Video wall example the example below shows a video wall with 4 displays 64
- Hdmi video options 66
- Output options 66
- System settings 68
- Device info 69
- Fan status 69
- General 69
- User account 71
- Add account 72
- Permission level 73
- Port name 74
- Network 75
- Edid mode 77
- Customized mode 78
- Edid cea description 79
- Customized edid settings 80
- Cea settings 83
- Video data 84
- Maintenance 86
- Osd cec 88
- Configuration menu 89
- H call up the command list for help 89
- Telnet operation 89
- Gt set gateway address 90
- Im set ip subnet mask 90
- Ip set ip address 90
- Lo load connections from profile 90
- Pw change password 90
- Ri read what input is connected to nn output 90
- Ro read what output is connected to nn input 90
- Sb set serial port baud rate 91
- Ss switch input to specified output 91
- Sv save the current connections into a profile 91
- Ti set timeout 91
- Vr software version information 91
- This page intentionally left blank 92
- Chapter 5 93
- Configuring the serial port 93
- Rs 232 commands 93
- Rs232 pin assignment 93
- Serial control protocol commands 93
- Verification 94
- Command input number output number control enter 95
- Each command string can be separated with a space 95
- For example to switch input port 02 to output port 04 type 95
- Note 1 by default input port 01 is tied to output port 01 input port 02 is tied to output port 02 and so on until port 04 i e o01 i01 o02 i02 95
- Sw i02 o04 enter 95
- Sw o03 off enter 95
- Sw o04 enter 95
- Switch port command 95
- The following tables show the possible values for the switch port command 95
- The formula for the switch command is as follows 95
- The switch port command allows you to switch ports on the vm6404h 95
- To switch output port 04 to the next port type 95
- To turn off video output on port 03 type 95
- The following table lists the available switch port commands 96
- The port number can be skipped and the default value will be used 96
- Vm6404h user manual 96
- Command control enter 97
- Edid mode command 97
- Edid port1 enter 97
- Extended display identification data edid is a data that contains a display s basic information and is used to communicate with the video source 97
- For example to use the port1 edid mode type 97
- Note each command string can be separated with a space 97
- The following table lists the available edid commands 97
- The following tables show the possible values for the edid command 97
- The formula for the edid command is as follows 97
- Command output number control enter 98
- For example to mute the audio coming from output port 1 type 98
- Mute allows you to enable or disable an output port s audio 98
- Mute command 98
- Mute o01 on enter 98
- Note 1 each command string can be separated with a space 98
- Output ports 98
- Skip the output port command to mute or enable the audio of all 98
- The following table lists the available mute commands 98
- The following tables show the possible values for the mute command 98
- The formula for the mute command is as follows 98
- Cec command 99
- Cec o01 on enter 99
- Command output number control enter 99
- Consumer electronics control cec allows interconnected hdmi devices to communicate and respond to the same remote control 99
- For example to enable the cec function on output port 1 type 99
- Note each command string can be separated with a space 99
- The following table lists the available cec commands 99
- The following tables show the possible values for the cec command 99
- The formula for the cec command is as follows 99
- Command output number 1 horizontal resolution number 2 vertical resolution number 3 frequency number 4 control enter 100
- For example to turn scaling off for output port 02 type 100
- Scaling command 100
- Scaling o native enter 100
- Scaling o02 off enter 100
- Scaling o04 1080p enter 100
- The following tables show the possible values for the scaling command 100
- The formula for the scaling command is as follows 100
- The scaling command allows you to set a resolution for scaling the display connected to an output port 100
- To set the scaling for all output ports to the connected display s native resolution type 100
- To set the scaling for output port 04 to 1920x1080 60hz type 100
- Note 1 each command string can be separated with a space 101
- The following table lists the available scaling commands 101
- The port number command string can be skipped and the default 101
- Value will be used 101
- Command control enter 104
- Echo command 104
- Echo on enter 104
- For example to enable the echo feature type 104
- Note each command string can be separated with a space 104
- The echo function updates the rs232 controller when operations are made via the front panel pushbuttons web browser or telnet the changes echo back to the rs232 controller to keep the settings in sync with the device 104
- The following table lists the available echo commands 104
- The following tables show the possible values for the echo comman 104
- The formula for the echo command is as follows 104
- Black screen command 105
- Blackscreen on enter 105
- Command control enter 105
- For example to enable the black screen function type 105
- Note each command string can be separated with a space 105
- The black screen command turns a display screen black when no source signal is detected this prevents the display from showing the default blue or other color used when no source signal is detected 105
- The following table lists the available black screen commands 105
- The following tables show the possible values for the black screen comman 105
- The formula for the black screen command is as follows 105
- Read command 106
- Reset command 106
- Baud 38400 enter 107
- Baud rate command 107
- Command control enter 107
- For example to set 38400 as the baud rate type 107
- Note each command string can be separated with a space 107
- The baud rate command allows you to set the rs 232 data rate for the vm6404h to use options are 9600 19200 default 38400 and 115200 107
- The following table lists the available baud rate commands 107
- The following tables show the possible values for the baud rate command 107
- The formula for the baud rate command is as follows 107
- Command profile number control enter 108
- For example to save the current connection configuration to profile 02 type 108
- Note each command string can be separated with a space 108
- Profile f 02 save enter 108
- Save load profile command 108
- The following table lists the available save load profile commands 108
- The following tables show the possible values for the save load profile commands 108
- The formula for the save load profile command is as follows 108
- The save load profile command allows you to save and load connection profiles saving profiles will save the connections currently in use 108
- Command control enter 109
- For example to enable the osd type 109
- Note each command string can be separated with a space 109
- Osd command 109
- Osd on enter 109
- The following table lists the available osd commands 109
- The following tables show the possible values for the osd command 109
- To enable or disable the on screen display osd using the following command 109
- Alert command 110
- Alert i01 m1 enter 110
- Command input number control enter 110
- For example to enable the basic alert function for input port 1 type 110
- Note each command string can be separated with a space 110
- The following table lists the available alert commands 110
- The following tables show the possible values for the alert command 110
- To trigger a warning when issues arise for a specific input port use the following command 110
- Rs 232 pin assignment 111
- This page intentionally left blank 112
- Appendix 113
- General 113
- Safety instructions 113
- Rack mounting 115
- International 116
- North america 116
- Technical support 116
- Specifications 117
- Limited warranty 119
- The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions or update for further inquiries please contact your direct vendor 119
Похожие устройства
- Aten VM5404H Краткое руководство по установке
- Aten VM5404H Описание и спецификации продукта
- Aten VM5404H Руководство пользователя
- Aten VM5808H Краткое руководство по установке
- Aten VM5808H Описание и спецификации продукта
- Aten VM5808H Руководство пользователя
- Aten VM0404 Краткое руководство по установке
- Aten VM0404 Описание и спецификации продукта
- Aten VM0404 Руководство пользователя (RS-232 Control Tool)
- Aten VM0404 Руководство пользователя
- Aten VM0808H Краткое руководство по установке
- Aten VM0808H Описание и спецификации продукта
- Aten VM0808H Руководство пользователя (RS-232 Control Tool)
- Aten VM0808H Руководство пользователя
- Aten VM1616T Краткое руководство по установке
- Aten VM1616T Описание и спецификации продукта
- Aten VM1616T Руководство пользователя (RS-232 Control Tool)
- Aten VM1616T Руководство пользователя
- Aten VM0808 Краткое руководство по установке
- Aten VM0808 Описание и спецификации продукта
Скачать
Случайные обсуждения