![ECS Elitegroup H61H2-M2 (V2.0) [7/68] Bios firmware](/img/pdf.png)
ECS Elitegroup H61H2-M2 (V2.0) [7/68] Bios firmware
![ECS Elitegroup H61H2-M2 (V2.0) [7/68] Bios firmware](/views2/1212505/page7/bg7.png)
3
Introducing the Motherboard
The motherboard comes with the following expansion options:
• One PCI Express x16 slot for Graphic Interface
• Two PCI Express x1 slots
• Four SATA 3.0 Gb/s connectors
Expansion Options
The motherboard has a full set of I/O ports and connectors:
Integrated I/O
• One LAN port
• One D-sub (VGA) port
• One DVI port (Optional)
• One HDMI port (Optional)
• Four USB 2.0 ports
• One PS/2 keyboard and PS/2 mouse connectors
• Audio jacks for microphone, line-in and 6-ch line-out
The firmware can also be used to set parameters for different processor clock
speeds.
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memory timing
• Graphic parameters
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
1. Some hardware specifications and software items are subject to change
without prior notice.
2. Due to chipset limitation, we recommend that motherboard be operated
in the ambiance between 0 and 50
°C.
Onboard LAN (Optional)
The onboard LAN provides the following features:
• Supports PCI Express
TM
1.1
• Integrated 10/100 transceiver
• Wake-on-LAN and remote wake-up support
• Supports PCI Express
TM
1.1
• Integrated 10/100/1000 transceiver
• Wake-on-LAN and remote wake-up support
Содержание
- Copyright 1
- Disclaimer 1
- Federal communications commission fcc 1
- Preface 1
- Trademark recognition 1
- About the manual 2
- Canadian department of communications 2
- Declaration of conformity 2
- Preface 2
- Chapter 1 1 3
- Chapter 2 7 7 7 7 7 3
- Chapter 3 25 3
- Connecting i o devices 20 connecting case components 1 3
- Installing hardware 0 3
- Installing the motherboard 7 safety precautions choosing a computer case installing the motherboard in a case checking jumper settings 3
- Introducing the motherboard 1 introduction feature specifications motherboard components 3
- Preface i 3
- Tttttable of contents able of contents able of contents able of contents able of contents 3
- Using bios 25 about the setup utility 25 3
- Using bios 6 3
- Chapter 4 57 57 57 57 57 4
- Chapter 5 61 61 61 61 61 4
- Chapter 1 introducing the motherboard 5
- Introducing the motherboard 5
- Introduction 5
- Chipset 6
- Feature 6
- Introducing the motherboard 6
- Memory 6
- Processor 6
- Bios firmware 7
- Expansion options 7
- Integrated i o 7
- Introducing the motherboard 7
- Onboard lan optional 7
- Introducing the motherboard 8
- Specifications 8
- Introducing the motherboard 10
- Table of motherboard components 10
- Chapter 2 installing the motherboard 11
- Choosing a computer case 11
- Installing the motherboard 11
- Installing the motherboard in a case 11
- Safety precautions 11
- Checking jumper settings 12
- Installing the motherboard 12
- Setting jumpers 12
- Checking jumper settings 13
- Installing the motherboard 13
- Jumper settings 13
- Before installing the processor 14
- Fail safe procedures for over clocking 14
- Installing hardware 14
- Installing the motherboard 14
- Installing the processor 14
- Cpu installation procedure 15
- Installing the motherboard 15
- Ddr3 sdram memory module table 16
- Installing memory modules 16
- Installing the motherboard 16
- Installation procedure 17
- Installing the motherboard 17
- Expansion slots 18
- Installing add on cards 18
- Installing the motherboard 18
- Installing the motherboard 19
- Connecting optional devices 20
- F_audio front panel audio header 20
- Installing the motherboard 20
- Refer to the following for information on connecting the motherboard s optional devices 20
- Sata1 4 serial ata connectors 20
- These connectors are used to support the serial ata 3 gb s device simpler disk drive cabling and easier pc assembly it eliminates limitations of the current parallel ata interface but maintains register compatibility and sofeware compatibility with prallel ata 20
- This header allows the user to install auxiliary front oriented microphone and line out ports for easier access 20
- F_usb1 2 front panel usb headers 21
- Installing the motherboard 21
- Please make sure that the usb cable has the same pin assignment as indicated above a different pin assignment may cause damage or system hang up 21
- The motherboard has two usb 2 headers supporting four usb 2 ports addition ally some computer cases have usb ports at the front of the case if you have this kind of case use auxiliary usb connector to connect the front mounted ports to the motherboard 21
- Tpm optional trusted platform module header 21
- Trusted platform module tpm is a published specification detailing a microcontrollerthat can store secured information and implementations of that specification 21
- Case chassis intrusion detect header 22
- Com onboard serial port header 22
- Connect a serial port extension bracket to this header to add a serial port to your system 22
- Installing the motherboard 22
- Me_unlock me unlock header 22
- Spdifo spdif out header 22
- Spdifout 2 vcc 3 key 4 gnd 22
- This detects if the chassis cover has been removed this function needs a chassis equipped with instrusion detection switch and needs to be enabled in bios 22
- This is an optional header that provides an spdifo sony philips digital interface output to digital multimedia device through optical fiber or coaxial connector 22
- About sata connectors 23
- Installing a sata hard drive 23
- Installing serial ata hard drives 23
- Installing the motherboard 23
- Connecting i o devices 24
- Installing the motherboard 24
- Connecting 24 pin power cable 25
- Connecting case components 25
- Installing the motherboard 25
- Atx_power atx 24 pin power connector 26
- Connecting 4 pin power cable 26
- Cpu_fan cpu cooling fan power connector 26
- Installing the motherboard 26
- Sys_fan system cooling fan power connectors 26
- Atx12v atx 12v power connector 27
- Installing the motherboard 27
- Spk internal speaker 27
- Connecting pins 1 and 3 to a front panel mounted led provides visual indication that data is being read from or written to the hard drive for the led to function properly an ide drive should be connected to the onboard ide interface the led will also show activity for devices connected to the scsi hard drive activity led connector 28
- Connecting pins 2 and 4 to a single or dual color front panel mounted led provides power on off sleep and message waiting indication 28
- Front panel header 28
- Hard drive activity led 28
- Installing the motherboard 28
- Power sleep message waiting led 28
- Power switch 28
- Reset switch 28
- Supporting the power on off function requires connecting pins 6 and 8 to a momen tary contact switch that is normally open the switch should maintain contact for at least 50 ms to signal the power supply to switch on or off the time requirement is due to internal de bounce circuitry after receiving a power on off signal at least two seconds elapses before the power supply recognizes another on off signal 28
- Supporting the reset function requires connecting pin 5 and 7 to a momentary contact switch that is normally open when the switch is closed the board resets and runs post 28
- The front panel header f_panel provides a standard set of switch and led headers commonly found on atx or micro atx cases refer to the table below for informa tion 28
- This concludes chapter 2 the next chapter covers the bios 28
- About the setup utility 29
- Chapter 3 using bios 29
- Entering the setup utility 29
- The standard configuration 29
- Using bios 29
- Resetting the default cmos values 30
- Using bios 30
- Advanced 31
- Bios navigation keys 31
- Default 31
- Language 31
- Using bios 31
- Date time the date and time items show the current date and time on the computer if you are running a windows os these items are automatically updated whenever you make changes to the windows date and time properties utility 32
- Main menu 32
- System language english this item is used to set system language 32
- This menu shows the information of bios and enables you to set the system language date and time 32
- Using bios 32
- Advanced menu 33
- Lan configuration 33
- Network stack enabled use this item to enable or disable uefi network stack ipv4 6 pxe support enabled use these items to enable ipv4 6 pxe boot support if disabled ipv4 6 pxe boot option will not be created 33
- Onboard lan controller enabled use this item to enable or disable the onboard lan 33
- The advanced menu items allow you to change the settings for the cpu and other system 33
- The item in the menu shows the lan related information that the bios automatically detects 33
- Using bios 33
- Cpu smart fan control enabled 34
- On motherboards support hardware monitoring this item lets you monitor the parameters for critical voltages temperatures and fan speeds 34
- Pc health status 34
- This item allows you to enable disable the control of the cpu fan speed by changing the fan voltage 34
- To view the following screen smart fan function 34
- Using bios 34
- Using bios 35
- Eup support enabled this item allows user to enable or disable eup support 36
- Power led type dual color led this item shows the type of the power led 36
- Power management setup 36
- Resume by pme disabled the system can be turned off with a software command if you enable this item the system can automatically resume if there is an incoming call on the pci modem or pci lan card you must use an atx power supply in order to use this feature use this item to do wake up action if inserting the pci card 36
- Resume by ps2 kb s3 disabled this item enables or disables you to allow keyboard activity to awaken the system from power saving mode 36
- Resume by ps2 ms s3 disabled this item enables or disables you to allow mouse activity to awaken the system from power saving mode 36
- Resume by ring disabled the system can be turned off with a software command if you enable this item the system can automatically resume if there is an incoming call on the modem you must use an atx power supply in order to use this feature 36
- Resume by usb s3 disabled this item allows you to enable disable the usb device wakeup function from s3 mode 36
- This page sets up some parameters for system power management operation 36
- To return to the advanced menu page 36
- Using bios 36
- Acpi configuration 37
- Acpi sleep state s3 suspend to ram this item allows user to enter the acpi s3 suspend toram sleep state default 37
- Cpu configuration 37
- The item in the menu shows the cpu 37
- The item in the menu shows the highest acpi sleep state when the system enters suspend 37
- To return to the advanced menu page 37
- Using bios 37
- Using bios 38
- H61 chipset is not fully support ahci mode hw support only 39
- Sata configuration 39
- Sata mode ide mode use this item to select sata mode 39
- Sata port 1 4 not present this motherboard supports four sata channel and each channel allows one sata device to be installed use these items to configure each device on the sata channel 39
- To return to the advanced menu page 39
- Use this item to show the mode of serial ata configuration options 39
- Using bios 39
- All usb devices enabled use this item to enable or disable all usb devices 40
- Legacy usb support enabled use this item to enable or disable support for legacy usb devices setting to audio allows the system to detect the presence of the usb device at startup if detected the usb controller legacy mode is enabled if no usb device is detected the legacy usb support is disabled 40
- To return to the advanced menu page 40
- Usb configuration 40
- Use this item to show the information of usb configuration 40
- Using bios 40
- Change settings auto 41
- Device settings io 3f 8h irq 4 41
- Serial port enabled 41
- Super io chip it8728 this item shows the information of the super io chip 41
- Super io configuration 41
- This item allows you to enable or disable serial port 41
- This item shows the information of the device settings 41
- To return to the super io configuration page 41
- To view the following screen 41
- Use this item to change device settings 41
- Use this item to show the information of super io configuration 41
- Using bios 41
- Current tpm status information 42
- No tpm hardware 42
- This item enables or disables tpm support 42
- This item shows the information of current tpm status 42
- This item shows the tpm status 42
- To return to the advanced menu page 42
- To view the following screen 42
- Tpm support enabled 42
- Trusted computing 42
- Using bios 42
- And view the following screen 43
- Chipset menu 43
- Dvmt memory 256m 43
- Igd memory 64m 43
- Igd multi monitor disabled 43
- The chipset menu items allow you to change the settings for the north bridge chipset south bridge chipset and other system 43
- This item enables or disables igd internal graphics device multi monitor 43
- This item is used to select dvmt 5 total graphic memory size by the internal graphics device 43
- This item shows the information of the igd internal graphics device memory 43
- To return to the chipset menu page 43
- Using bios 43
- Multi monitor technology 44
- Using bios 44
- Step 2 install all the drivers of pci express graphic cards click the browse cd item then appears the following screen select the driver you want to install e g nvidia geforce 8400 gs microsoft corporation wddm v1 and double click it 45
- Step 3 enable igd multi monitor from bios in the following bios screen please set igd multi monitor to enabled 45
- Using bios 45
- Display devices 46
- Enter the control panel menu select the display in the all control panel items and click the screen resolution then appears the following screen 46
- Select display devices set the multiple displays option and to extend destop for display multi monitor technology 46
- Set the multiple displays 46
- Show the path of the setting location 46
- Step 4 change the appearance of your displays under windows 7 8 46
- The type of the display 46
- Using bios 46
- Using bios 47
- Audio configuration 48
- Azalia hd audio enabled 48
- Azalia internal hdmi codec enabled 48
- Case open warning disabled 48
- Chassis opened no 48
- Restore ac power loss power off 48
- This item enables or disables azaia internal hdmi codec 48
- This item enables or disables azalia hd audio 48
- This item enables or disables the warning if the case is opened up and the item below indicates the current status of the case 48
- This item enables your computer to automatically restart or return to its operating status 48
- This item indicates whether the case has been opened 48
- This item shows the information of the audio configuration 48
- To return to the chipset menu page 48
- To view the following screen 48
- Using bios 48
- Me fw version 8 248 this item shows the me fw version 49
- To return to the chipset menu page 49
- To view the following screen 49
- Using bios 49
- Cpu frequency 1 100 mhz 10000 50
- Cpu overclocking configuration scroll to this item to view the following screen 50
- Cpu ratio 31 50
- M i b iii mb intelligent bios iii menu 50
- This item allows users to control non turbo cpu ratio 50
- This item shows the information of the cpu frequency 50
- This page enables you to set the clock speed and system bus for your system the clock speed and system bus are determined by the kind of processor you have installed in your system 50
- Using bios 50
- Cas latency tcl 8 51
- Chipset overclocking configuration scroll to this item to view the following screen 51
- Enhanced intel speedstep technology enabled 51
- Performance memory profiles automatic 51
- Ras active time tras 24 51
- Ras to cas delay trcd 8 51
- Row precharge time trp 8 51
- This item allows users to enable or disable the eist enhanced intel speedstep technology 51
- This item allows you to select the memory mode automatic manual xmp profile 1 or 2 51
- This item determines the operation of ddr sdram memory cas column address strobe it is recommended that you leave this item at the default value the 2t setting requires faster memory that specifically supports this mode 51
- This item specifies ras to cas delay to rd wr command to the same bank 51
- This item specifies row precharge to active or auto refresh of the same bank 51
- This item specifies the ras active time 51
- This item specifies the write recovery time 51
- To return to the m i b iii menu page 51
- Using bios 51
- Write recovery time twr 10 51
- Using bios 52
- Boot configuration this item shows the information of the boot configuration 53
- Boot menu 53
- Boot mode select legacy use this item to select boot mode 53
- Boot option 1 2 3 4 5 6 7 these items show the boot priorities 53
- Bootup numlock state on this item enables you to select numlock state 53
- Launch pxe oprom disabled the item enables or disables launch pxe option rom launch storage oprom enabled the item enables or disables launch storage option rom 53
- Operation system select windows7 or other os this item is used to select the operation system 53
- Quiet boot enabled this item enables or disables quiet boot 53
- Set boot priority this item enables you to set boot priority for all boot devices 53
- This page enables you to set the keyboard numlock state 53
- Using bios 53
- Boot option filter 54
- Csm parameters oprom execution boot options filter etc 54
- Launch csm 54
- Launch pxe oprom policy this controls the execution of uefi and legacy pxe oprom 54
- Launch storage oprom policy this controls the execution of uefi and legacy storage oprom 54
- Launch video oprom policy this controls the execution of uefi and legacy video oprom 54
- Other pci device rom priority for pci devices other than network mass storage or video defines which oprom to launch 54
- This option controls if csm will be launched 54
- This option controls what devices system can boot to 54
- To return to the boot menu page 54
- To see the submenu 54
- To view the following screen 54
- Using bios 54
- Administrator password status not install this item shows administrator password installed or not 55
- Secure boot enabled this item is used to control the secure boot flow it is possible only if system runs in user mode 55
- Secure boot mode custom this item is used to select secure boot mode when you select standard mode secure boot policy is fixed when you select custom mode the image execution policy and secure boot key databases are changeable 55
- Secure boot state disabled this item allows you to enable or disable the secure boot state 55
- Security menu 55
- System mode state setup this item shows system mode setup or not 55
- This page enables you to set setup administrator password and user password 55
- User password status not install this item shows user password installed or not 55
- Using bios 55
- Image execution policy scroll to this item to view the following screen 56
- Internal fv option rom removable media fixed media always execute deny execute these items allow you to select image execution policy per device path on security violation only users logged with administrative password can exercise query user policy setting 56
- To return to the security menu page 56
- Using bios 56
- Append an entry to kek db dbx this item launches the file browser to append new signature database from the file the file data must be formatted as efi variable with timebased authenticated header 57
- Authorized signature database db this item shows the information of the authorized signature database 57
- Default key provisioning disabled this item enables or disables you to force oem default secure boot keys if system is in setup mode 57
- Delete the pk kek db dbx this item is used to delete the variable key exchange key database kek this item shows the information of the key exchange key database 57
- Forbidden signature database dbx this item shows the information of the forbidden signature database 57
- Get pk kek db dbx to file this item is used to store secure variable to a file with a matching name in selected file system s root 57
- Key management scroll to this item to view the following screen 57
- Platform key pk this item shows the information of the platform key set pk kek db dbx from file this item launches the file browser to set efi variable from the file the file data must be formatted as efi variable with timebased authenticated header 57
- Using bios 57
- Boot override use this item to select the boot device 58
- Discard changes and exit this item enables you to discard any changes that you have made and exit 58
- Discard changes and reset this item enables you to discard any changes that you have made and reset 58
- Discard changes this item enables you to discard any changes that you have made 58
- Exit menu 58
- Restore defaults this item enables you to restore the system defaults 58
- Restore user defaults this item enables you to restore user defaults 58
- Save as user defaults this item enables you to save the changes that you have made as user defaults 58
- Save changes and exit this item enables you to save the changes that you have made and exit 58
- Save changes and reset this item enables you to save the changes that you have made and reset 58
- Save changes this item enables you to save the changes that you have made 58
- Save options this item enables you to save the options that you have made 58
- This page enables you to exit system setup after saving or without saving the changes 58
- Using bios 58
- Updating the bios 59
- Using bios 59
- Auto installing under windows xp 7 8 61
- Chapter 4 using the motherboard software 61
- Running setup 61
- Using the motherboard software 61
- Drivers and software are automatically installed in sequence follow the onscreen instructions confirm commands and allow the computer to restart a few times to complete the installation 62
- Using the motherboard software 62
- Windows 8 will show the following screen after system restart you must select desktop in the bottom left to install the next driver 62
- Ecs utility software intelligent ez utility 63
- Manual installation 63
- Using the motherboard software 63
- Using the motherboard software 64
- A system does not power up and the fans are not running 65
- B power is on fans are running but there is no display 65
- C the pc suddenly shuts down while booting up 65
- Chapter 5 trouble shooting 65
- Start up problems during assembly 65
- Trouble shooting 65
- Maintenance and care tips 66
- Start up problems after prolong use 66
- Trouble shooting 66
- Basic troubleshooting flowchart 67
- Yes yes 67
Похожие устройства
- ECS Elitegroup H61H2-M3 (V1.0) Руководство пользователя
- ECS Elitegroup H61H2-M3 (V2.0) Руководство пользователя
- ECS Elitegroup H61H2-M4 Руководство пользователя
- ECS Elitegroup H61H2-M5 Руководство пользователя
- ECS Elitegroup H61H2-M6 (V1.0) Руководство пользователя
- ECS Elitegroup H61H2-M6 (V2.0) Руководство пользователя
- ECS Elitegroup H61H2-M7 Руководство пользователя
- ECS Elitegroup H61H2-M8 Руководство пользователя
- ECS Elitegroup H77H2-M Руководство пользователя
- ECS Elitegroup H77H2-M3 Руководство пользователя
- ECS Elitegroup H77H2-M4 Руководство пользователя
- ECS Elitegroup P67H2-A Руководство пользователя
- ECS Elitegroup P67H2-A2 Руководство пользователя
- ECS Elitegroup P67H2-A3 Руководство пользователя
- ECS Elitegroup P67H2-A4 Руководство пользователя
- ECS Elitegroup Q77H2-M Руководство пользователя
- ECS Elitegroup Q77H2-TI Руководство пользователя
- ECS Elitegroup X77H2-A3 Руководство пользователя
- ECS Elitegroup H61H2-TI Руководство пользователя
- ECS Elitegroup H67H2-A3 Руководство пользователя
Скачать
Случайные обсуждения
Ответы 1
При выходе из спящего режима долго черный экран, но это не всегда, в чем проблема?
5 лет назад
Ответы 1
Как настроить чтоб при движении мышкой загорался экран, пошагово что куда нажать?
5 лет назад