AEG voxtel r200 Инструкция по эксплуатации онлайн [6/140] 176820

tPlug the mains adaptor into a 220V AC, 50Hz main socket.

tPlace the PMR units in the charge cradle in an upright position. The

charge LED indicators will light up.

tIt takes about 10 hours to fully recharge the batteries if they are

completely run down. New batteries take up to 14 hours to fully

charge.

Important:

tThe unit must be charged using the mains adaptor provided. Using

any other adaptor will result in non-compliance with EN60950-1 and

will invalidate any approvals and warranty.

tAlways turn off the PMR units when charging. This will shorten the

charging time.

3.4.2 Using the adapter (model R200/R210/R220) (see P5)

tLift the charge socket cover located on the upper side of the PMR.

tInsert the round connector of the 9V DC / 200 mA adaptor into the

charge jack.

tPlug the mains adaptor into a 220 V AC, 50 Hz main socket.

3.5 Battery meter

The battery meter is located in the left corner of the LCD screen. It

appears like a battery with three bars inside. These indicate the amount

of power available. When the battery level reaches it minimum level in

PMR on mode, the unit will emit two beep tones and automatically the

unit will power off.

The unit can detect the battery charge in 4 levels:

Battery charge at high level.

Battery charge at medium level.

Battery charge at low level. At this level, the unit will

emit a “beep” sound for every 10 seconds in normal

mode.

Important: Charge the unit for 10-14 hours.