Fubag BS 10000 D ES [10/32] O m perator s anual

Fubag BS 10000 D ES [10/32] O m perator s anual
- 9 -
www.fubag.ru
Omperator's anual
Using electric power
- Check the CIRCUIT BREAKER is "ON". If the breaker is "OFF", set the breaker "ON".
NOTE
- When the circuit breaker or no-fuse breaker turns off
during operation, the generator is overloaded or the
appliance is defective.
- Stop the generator immediately, check the appliance
and /or generator for overloading or defect and repair as
necessary
- Turn off the power switch of the electric equipment or unplug the cord from receptacle of the
generator
- Allow the engine about 3 minutes to cool down at no-load
before stopping
- Set the engine switch to "OFF" position
- Close (stop) the fuel cock
The oil sensor detects the fall in oil in the crankcase and
automatically stops the engine when the oil level falls
down below the safety limit
When engine has stopped automatically, check the oil
level
If the engine does not start by usual starting
procedures, check the oil level
- Check the digital display for proper voltage. This generator is thoroughly tested and adjusted in the
factory.
If the generator does not produce the specified voltage, consult your nearest FUBAG generator
dealer
- Turn off the switch(es) of the electrical appliance(s) before connecting to the generator
- lnsert the plug(s) of the electrical appliance(s) into the receptacle
WARNING
1. Be sure to ground the generator if the connected electrical equipment is grounded.
2. /
.
.
.
:
Connect to power supply
:
.
.
.
.
.
.
-
.
-
.
Stoppin the generator
Working conditions
stopped
work
Description Value Unit
Reduction in output Each additional Unit
Set up height about sea-level < 100 [m] 1 % 100 [m]
Temperature < 27 [°C] 4 % 10 [°C]
Relative humidity < 60 [%]
REDUCED OUTPUT
AMBIENT CONDITIONS

Содержание

Скачать