Fubag PTH 400 H [8/26] Page07
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Fubag PTH 400 H [8/26] Page07

Fubag PTH 400 H [8/26] Page07

Содержание

Похожие устройства

Fubag Operator s manual www fubag ru 5 Usage of the motor pump Starting up WARNING A ways toP UPthe pump housing before starting the engine WAKN presence of liquid is deterioration necessary to prime lubricate a pump risk of 1 Fully immerse the strainer in the liquid to be drawn in If there is a risk of blockage place the strainer on a rock bed 2 Unscrew the pump filler plug 3 Top up the pump housing with water 4 Screw the pump filler plug back on 5 Move the choke knob into position A B Do not use the starter when the engine is hot or when the atmospheric temperature is high 6 Set the engine switch to I and activate the gas lever 7 Slowly pull the recoil starter handle once until encountering resistance allow it to return back gently 8 Pull the recoil starterfirmly strongly until the engine starts 9 Gently set the choke knob to 111 and wait for an engine temperature increase before releasing the gas lever If the engine does not start repeat the operation until the engine starts up If the pump does not discharge stop the motor pump and check the suction circuit Operation A WARNING During the operation don t allow any foreign bodies to block the suction or the discharge Don t block the discharge pipe don t allow any vehicle to park on the pipe Never close a valve abruptly water hammer action can seriously damage the pump When the speed of the motor pump has stabilised around 3 min move the gas lever into position for the desired speed The motor pump discharges the liquid not only according to the speed but also the elevation height for suction discharge and the quality of liquid to be drawn in clean charged water

Скачать