Fubag PTH 600 ST [6/26] Page05
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Fubag PTH 600 ST [6/26] Page05

Fubag HONDA PTH 1000ST [6/26] Page05

Содержание

Похожие устройства

Fubag Operator s manual www fubag ru 4 Preparation before use Positioning for operation Place the motor pump on a sufficiently strong flat and horizontal surface so that the electric pump cannot sink in the inclination must not exceed 10 in any direction Select a clean location ventilated and protected from inclement weather and provide an oil and fuel supply close to the place of motor pump usage while still maintaining a safe distance Select a location which will not impede the movement of people or vehicles Make sure that the motor pump remains stable and immobile while in operation Don t forget that the suction hose tends to pull the motor pump towards the water source during pumping Place the motor pump as close as possible to the liquid being drawn in The shorter the vertical distance between the motor pump and the liquid surface the more rapid the priming and the greater the volume of liquid pumped Submerge the strainer completely within the liquid taking care that it is not blocked Oil level 1 Remove the filler plug dipstick no 2 by unscrewing it and wipe the dipstick 2 Insert the dipstick into the filler neck no 3 without screwing it N B A second black plug no 4 without a dipstick is available if necessary on the other side of the engine 3 Visually check the level and top up if necessary 4 Tighten the filler plug dipstick no 2 completely onto the filler neck no 3 5 Check that there are no leaks 6 Wipe off excess oil with a clean cloth 5 4

Скачать