Home
Главная
Saturn
Морозильная Камера
ST-CF1905
Руководство пользователя Страница: 5

Saturn ST-CF1905 [5/16] Ò³ãæ 5

General knowledge for usage

Set different cooling temperatures according

to different goods. Too low cooling

temperature will waste power consumption.

Keep some spaces between stored goods.

It do good for cooling air circulating and

heat exchange and a better cooling effect

will be achieved.

Seal the food by fresh kept bags or closed

container to avoid smell-mixed or dry.

For hot food, hold it cooled and then put

into the appliance. If put it in hot status, it

will decrease the cooling level of the

goods nearby.

Open the door as briefly as possible.

Make sure the door closed wholly to save

power consumption.

Put labels marked time onto the goods.

The goods stored early should be taken

out early.

When switching off or a power cut, must

restart after 5 minutes minimum.

Or it will shorten the compressor life or

even damage the compressor.

If know a power cut in advance, set the

thermostat for a low temperature and keep the

appliance cooling for some time. And open the

door as briefly as possible. When power is cut,

try not to open the door and do not add goods

into the appliance.

Usage at the first time

Place the appliance according to the

installing requirements.

Open the door for air ventilating.

Clean the inner cabinet before using.

After installing the appliance, wait for 30 minutes at least before switching on the appliance.

( During transportation the oil in the compressor may have flowed into the refrigeration system.)

At the beginning, the cabinet is hot and the compressor will work for a long time and then stopped

by the thermostat at the set temperature. At that time, the compressor can works and stops regularly.

Recommend to put goods into the cabinet when the cabinet temperature reaches the set

temperature.

Thermostat

The cabinet temperature is controlled by the thermostat on the panel. The thermostat can set a

suitable temperature range according to different ambient temperatures and different kinds and QTY

of goods.

The green indicator is the POWER indicator. When plugging in, the green indicator works.

The red indicator is the OPERATION indicator. When the compressor runs, the red indicator works.

The thermostat knob can be rotated from MIN to MAX.

When rotating clockwise, the cooling time will be longer & the stopping time will be shorter. In this

way, the cabinet temperature will be lower.

When rotating anticlockwise, the cooling time will be shorter & the stopping time will be longer. In this

way, the cabinet temperature will be higher.

After adjusting the thermostat, it will take some time to reach the stable working.

Saturn ST-CF1905 [5/16] Ò³ãæ 5

Содержание

Похожие устройства