Vitesse VS-708 [3/8] Before the first using
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitesse VS-708 [3/8] Before the first using

Vitesse VS-708 [3/8] Before the first using
BEFORE THE FIRST USING
1. Wash all parts (except body) in warm soapy water.
2. Before plugging in, ensure the appliance is switched off
3. Before plugging in, ensure the“ON/OFF”switch is turned to“OFF”position.
Similarly, ensure the“ON/OFF”switch is turned to“OFF”position.
INSTRUCTION FOR USING
ASSEMBLING
Locate the unit on a firm place.The air passage should be kept free and not
blocked.
Place the feed screw into the head, long end first, by turning the feed screw lightly
until it is set into the motor housing(fig.3).
Place the cutting blade onto the feed screw shaft with the blade facing the front as
illustrated (fig.4). If it is not fitted properly, meat will not be ground
Place the desired cutting plate next to the cutting blade, fitting protrusions in the
slots (fig.5).
Support or press the centre of the cutting plate with one finger then screw the
fixing ring until tight with another hand (fig.6). Do not over tighten.
P/4
MINCING MEAT
1. Cut all foods into pieces so that they pass easily into
the hopper opening.
2. Plug in and turn the“On/OFF”switch to“ON”position.
3. Feed foods onto the hopper plate. To feed it use the
food pusher only (Fig.7).
4. After use switch the unit off and unplug it from the
power supply.
REVERSE FUNCTION
In case of jamming switch off the appliance and switch reverse knob.
Snake will be rotating in the opposite direction, and the head will get empty.
If it doesn't work, switch off the unit and clean it.
MAKING SAUSAGE
Mince mutton once or twice.
Fry onion until brown and add minced mutton, all spice, salt and flour.
Mince meat three times and mix all ingredients together in a bowl. More meat and
less flour for outlet cover creates better consistency and taste.
Grind the mixture three times.
Disassemble by reversing the steps from 5-3 to remove the cutting plate and
cutting blade.
Place kubbe attachments A and B onto the feed screw shaft together, fitting
protrusions in the slots (fig.8).
Screw fixing ring into place until tight. Do not over tighten (fig.9).
Make the cylindrical outlet cover (fig.10).
Form kubbe as illustrated below and deep fry.
P/3
www.vitesse.ru

Содержание

Похожие устройства

Скачать