Bresser national geographic 20x [9/32] Disposal

Simple Observation

Place the object to be observed (for example, a rock) in

the middle of the microscope stage (5). When possible,

it is best to ﬁ x the object to be observed in place with the

stage clips (6).

Now, take a look through the binocular eye lens (1) and

change the distance of the eyepiece (3) so that you see

a circular, clear image.

Adjust the sharpness of the image by slowly turning the

focus knob (7).

Illumination

To illuminate objects to be observed, remove both eye-

pieces (3) from the eyepiece supports (1) and turn the

entire microscope over. In the base of the microscope

there is a battery compartment (9). Push the clamp clo-

sure (10) and open the battery compartment by pulling

the cover open diagonally.

Place the batteries in the compartment so that the ﬂ at

minus poles (-) press against the spring terminal and the

plus poles (+) are touching the ﬂ at contact sheets.

Close the battery compartment with the cover and turn

the microscope around again. Place the eyepieces back

on. You can now turn on the light (4) with the on/off

switch (8) on the base of the microscope.

Notes on Cleaning

• Before cleaning the device, disconnect it from the

power supply by removing the plug or batteries.

• Only use a dry cloth to clean the exterior of the device.

To avoid damaging the electronics, do not use any

cleaning ﬂ uid.

• Protect the device from dust and moisture.

The batteries should be removed from the unit if it has

not been used for a long time.

EC Declaration of Conformity

Bresser GmbH has issued a ‘Declaration of Con-

formity’ in accordance with applicable guidelines

and corresponding standards. This can be viewed any

time upon request.

Disposal

Dispose of the packaging materials properly, ac-

cording to their type, such as paper or cardboard.

Contact your local waste-disposal service or environ-

mental authority for information on the proper disposal.