Cisco sb srw248g4-k9-eu [13/16] Reset button
![Cisco sb sf302-08pp-k9-eu [13/16] Reset button](/views2/1217417/page13/bgd.png)
Cisco 300 Series Managed Switches 13
• The LEDs of the corresponding RJ-45 port light to respond to the SFP
interface traffic.
NOTE SG300-10SFP and SG300-28SFP have dedicated SFP ports.
Their LED status and indication are the same as on the RJ-45 ports.
Front Panel LEDs
System LED—(Green) Lights steady when the switch is powered on, and
flashes when booting, performing self tests, and acquiring an IP address. If
the LED flashes Amber, the switch has detected a hardware failure.
LINK/ACT LED—(Green) Located on the left of the port. Lights steady
when a link between the corresponding port and another device is
detected. Flashes when the port is passing traffic.
PoE (if present)—(Amber) Located on the right of the port. Lights steady to
indicate that power is being supplied to a device attached to the
corresponding port.
100M LED (if present)—(Green) Located on the right of the port. Lights
steady when another device is connected to the port, is powered on, and a
100 Mbps link is established between the devices. When the LED is off, the
connection speed is under 100 Mbps or nothing is cabled to the port.
Gigabit LED (if present)—(Green) Located on the right of the port. Lights
steady when another device is connected to the port, is powered on, and a
1000 Mbps link is established between the devices. When the LED is off,
the connection speed is under 1000 Mbps or nothing is cabled to the port.
SFP (if present)—(Green) Located on the right of a GE port. Lights steady
when a connection is made through the shared port. Flashes when the port
is passing traffic.
Reset Button
The switch can be reset by inserting a pin or paper clip into the reset
opening. See Returning the Device to the Factory Default Settings for
details.
Back Panel
The power port and console port are located on the back panel of the
managed switch.
Power—The Power port is where you will connect the switch to power.
Depending on the model of switch you are using, this may be a power cord
or a power adaptor.
Содержание
- Mounting the cisco switch 2
- Welcome 2
- Rack mount placement 4
- Wall mounting 4
- Connecting network devices 5
- Power over ethernet poe considerations 6
- Accessing and managing your switch 8
- Configuring the cisco 300 series managed switch 8
- Troubleshoot your connection 10
- Features of the cisco 300 series managed switch 12
- Front panel ports 12
- Back panel 13
- Front panel leds 13
- Reset button 13
- Returning the device to the factory default settings 14
- Where to go from here 15
- 21503 01b0 16
Похожие устройства
- Cisco sb srw224g4-k9-eu Инструкция по эксплуатации
- Cisco sb srw208p-k9-eu Инструкция по эксплуатации
- Cisco sb srw208mp-k9-eu Инструкция по эксплуатации
- Cisco sb srw208-k9-g5 Инструкция по эксплуатации
- Cisco sb srw2024p-k9-eu Инструкция по эксплуатации
- Cisco sb srw2024-k9-eu Инструкция по эксплуатации
- Cisco sb srw2008p-k9-eu Инструкция по эксплуатации
- Cisco sb srw2008-k9-g5 Инструкция по эксплуатации
- Cisco sb spa8800 Инструкция по эксплуатации
- Cisco sb spa500s Инструкция по эксплуатации
- Cisco sb slm248pt-g5 Инструкция по эксплуатации
- Cisco sb slm248gt-eu Инструкция по эксплуатации
- Cisco sb slm224pt-eu Инструкция по эксплуатации
- Cisco sb slm224gt-eu Инструкция по эксплуатации
- Cisco sb slm2048t-eu Инструкция по эксплуатации
- Cisco sb slm2024t-eu Инструкция по эксплуатации
- Cisco sb slm2024pt-eu Инструкция по эксплуатации
- Cisco sbslm2016t-eu Инструкция по эксплуатации
- Cisco sb slm2008t-eu Инструкция по эксплуатации
- Cisco sb spa508g Инструкция по эксплуатации