Dune hd connect we-b [12/28] Accessing network drives

Dune HD Connect Quick Start Guide

Connecting USB Drives

To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive to an USB

port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB drive on

the main screen.

When connecting a USB drive requiring signicant power (such as USB HDD), use an external power supply for the

USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive.

Do not disconnect or switch off the USB drive when some write operation is in progress.

Accessing Network Drives

To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player menu, press the

“MENU” RC button, and choose “Create Network Folder”, then ll the parameters of the network drive as needed. The player

will show an item corresponding to the congured network drive on the main screen.

To browse the list of network resources accessible via SMB or UPnP protocols, use “Network Browser” item on the

main screen of the player menu.

NOTE: If some network resources are not shown by the player, you may need to wait some minutes and then retry (or

press the “MENU” RC button and choose “Refresh” command).

Formatting HDD

To format a HDD attached to the player, select the HDD item on the main screen of the player menu, press

the “INFO” RC button and choose “Format Disk” (to format the entire disk) or “Format Partition” (or to

format an already existing disk partition only). The player will format the disk. To format an unformatted HDD, just

press the “ENTER” RC button on the HDD item.

NOTE: To use EXT2/EXT3 disks formatted by the player on a Windows PC, you may need to install additional soft

ware on the PC, such as “EXT2FSD” (http://www.ext2fsd.com/).