AEG DD6490-M [11/28] Charcoal filter recycling version

Charcoal lter (recycling version)

Activation of the alarm signal

• In Recirculation Version Hoods, the Filter SaturationAlarmmust be activated on installation or

atalaterdate.

• PressandholdbuttonE(Delay)for5seconds,untilconrmationappearsonthedisplay:

 • Cashestwice–ActivatedCharcoalFiltersaturationalarmACTIVATED.

 • Cashesonce–ActivatedCharcoalFiltersaturationalarmDEACTIVATED.

BUTTON DISPLAY FUNCTIONS

Displays the set speed Turns the suction motor on and off

Displays the set speed Decreases the speed of the motor V3→ V2→ V1

Displays the set speed Increases the speed of the motor V1→ V2→ V3

Displays HI The spot ashes Starts maximum suction speed. After 5 minutes the speed will return automatically to the one

set before. This function can be deactivated by pressing the button again (the decimal point at

the centre of the display will ash).

Displays the time remaining

before the hood turns off (count-

down) and the Set speed.

The spot at the bottom right

ashes

Enables automatic delayed shutdown of the appliance (Delay), with a delay that depends on

the working speed set.

Speed 1 → delay 20 minutes

Speed 2 → delay 15 minutes

Speed 3 → delay 10 minutes

The proposed delay time can be changed by pressing the button successively and selecting one

of the options available (5, 10, 15, 20, 25 and 30 minutes). At the end of the time selected the

appliance will turn off automatically. To deactivate this function, simply press the button until the

option selected is 0 or turn the motor off.

Turns the hob lighting system on and off

Displays F Indicates the need to wash the metal grease lters. The alarm is triggered after the Hood has been

in operation for 100 working hours. This indication is only visible when the motor is turned off.

To reset the alarm:

Turn the motor off and press button D for approximately 3 seconds, until the display turns off.

Displays C Indicates the need to change the activated charcoal lters, and also to wash the metal grease

lters. The alarm is triggered after the Hood has been in operation for 200 working hours. This

indication is only visible when the motor is turned off. This indication must be activated following

the procedure described in the section on maintenance of the activated charcoal lter.

To reset the alarm:

Turn the motor off and press button D for approximately 3 seconds, until the display turns off.

     