Karcher BR 55/60 W Bp [29/485] Setting the vacuum bar
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Karcher BR 55/60 W Bp [29/485] Setting the vacuum bar

Karcher BR 55/60 W Bp [29/485] Setting the vacuum bar
English 29
Î Set the brush speed by turning the info
button.
– "...Power" - high speed (100%).
– "...Whisper" - medium speed (60%).
– "...Fine" - low speed (40%).
Î Press the info button to confirm the set
value.
몇 Warning!
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Î Press the pedal downwards; move it to
the left and release it upward. The
cleaning head is lowered and the brush
motor starts automatically.
Î
Adjust brush contact pressure at the lever.
Note
Carry out the initial cleaning attempts with
less contact pressure. Increase contact pres-
sure step-by-step until the desired cleaning
result is achieved. A correct setting of the
contact pressure reduces power consumption
and the wear and tear of the brushes.
The brush motors come to a halt when the
machine stops and when there is overload.
몇 Warning
Floors can get damaged on account of too
high contact pressure. Carry out the initial
polishing attempts with less contact pres-
sure. Increase the contact pressure as per
requirements until the desired polishing re-
sult is achieved.
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Î Loosen crossh-handles.
Î Turn the vacuum bar.
Î Tighten the cross-handles.
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Î Release the wing nuts.
Î Tilt the vacuum bar.
Î Tighten the wing nuts.
Switching on the cleaning head
Setting the Vacuum Bar
Oblique position
Inclination

Содержание

Похожие устройства

Скачать