Vitek VT-4029 SR [4/24] English

ENGLISH

CONNECTING THE SPEAKERS

Connect the speaker cables to the corresponding jacks on the rear panel

of the amplifier, according to the indicated color code and polarity. Press

down on the corresponding clamp. Without releasing the clamp, insert

the end of the corresponding wire into the terminal (round hole), and then

release the clamp. The wire is now firmly attached. Connect the center

speaker remote control transceiver cable to the transceiver input jack lo-

cated on the rear panel of the device.

All connections should be made with the main power off.

CONNECTING TO A SOURCE SIGNAL

In order to playback 5.1 channel sound, use RCA cables or a digital cable

to connect the audio output you’re your DVD player to the corresponding

audio input on the system.

Use an RCA cable to connect the audio output from a DVD or CD player to

the corresponding left (white) and right (red) CD (AUX 1) or AUX 2 input.

POWER

1. Insert the power plug into an electrical outlet.

2. Switch the POWER ON/OFF (11) button to the “ON” position. The red

STANDBY (12) indicator will light on the front panel of the device.

3. Press the STANDBY (12) button on the main unit or (1) on the remote

control unit to turn on the system. The display on the front panel of the

device will show the volume level.

4. In order to completely turn the system off, switch the POWER ON/OFF

button (11) to the OFF position.

4029.indd 44029.indd 4 07.04.2006 15:53:2907.04.2006 15:53:29