Vitek VT-1266 B [4/32] English

Vitek VT-1266 B [4/32] English
4
ENGLISH
IRON VT-1266 B
The•iron•is•intended•for•ironing•clothes•and•bed-
ding•and•for•vertical•steaming•of•fabrics.
DESCRIPTION
1.•
Water•spray
2.•
Water•inlet•lid
3.•
Continuous•steam•supply•knob
4.•
Burst•of•steam•button
5.•
Water•spray•button
6.•
Handle
7.•
Power•cord•protection
8.•
Heating•element•pilot•lamp
9.•
Base
10.•
Water•tank
11.•
Temperature•control•knob
12.•
Self-clean•button
13.•
Maximum•water•level•mark
14.•
Soleplate
ATTENTION!
For•additional•protection•it•is•reasonable•to•install•a•
residual•current•device•(RCD)•with•nominal•opera-
tion•current•not•exceeding•30•mA,•to•install•RCD,•
contact•a•specialist.
SAFETY MEASURES
Before•using•the•electrical•unit,•read•this•instruc-
tion•manual•carefully•and•keep•it•for•future•refer-
ence.
Use•the•unit•for•its•intended•purpose•only,•as•spec-
ified• in• this• manual.• Mishandling• of• the• unit• may•
lead•to•its•breakage•and•cause•harm•to•the•user•or•
damage•to•his/her•property.
Before• switching• the• unit• on,• make• sure• that•
your• home• mains• voltage• corresponds• to• the•
iron•operating•voltage.
The•power• cord•is•equipped•with•a•«europlug»;•
plug• it• into• the• socket• with• a• reliable•ground-
ing•contact.
To• avoid• risk• of• fire,• do• not• use• adapters• for•
plugging•the•unit•in.
To•avoid•mains•overloading,•do•not•switch•sev-
eral• electrical• appliances• on• with• high• power•
consumption•at•a•time.
Do•not•use•the•iron•outdoors•and•in•places•with•
high•humidity.
Place•the•iron•on•a•flat•stable•surface•or•use•a•
stable•ironing•board.
ATTENTION! The surfaces of the iron warm up
during operation. Avoid contact of open skin areas
with the iron hot surfaces or outgoing steam to
avoid burns.
Do•not•fill•the•water•tank•with•scented•liquids,•
vinegar,• starch• solution,• descaling• reagents,•
chemicals,•etc.
Do•not•switch•the•unit•on•in•places•where•aero-
sols• are• sprayed• or• highly• flammable• liquids•
are•used.
Make• sure• that• the• power• cord• is• not• on• the•
ironing•board•and•it•doesn’t•touch•hot•surfaces•
and•sharp•edges.
Never• leave• the• unit• connected• to• the• mains•
unattended.•During•breaks•in•operation,•put•the•
iron•on•the•base•(in•vertical•position).
Before• plugging/unplugging• the• iron,• set• the•
temperature•control•knob•to•the•minimum•posi-
tion• and• switch• the• continuous• steam• sup-
ply•off.
Always•unplug•the•iron•if•you•are•not•using•it.
Always• take• the• power• plug• out• of• the• mains•
socket•before•filling•the•water•tank•with•water.
The• water• inlet• lid• should• be• closed• during•
ironing.
To•unplug•the•iron,•always•hold•the•power•plug,•
never•pull•the•power•cord.
To• avoid• electric• shock,• do• not• immerse• the•
iron,•the•power•cord•and•the•plug•into•water•or•
any•other•liquids.
Before• taking• the• iron• away,• let• it• cool• down•
completely•and•pour•out•the•remaining•water.
Pour•out• water• from• the• water• tank• only• after•
unplugging•the•iron.
Clean the unit regularly.
Do not touch the unit body and the power
plug with wet hands.
Do•not•allow•children•to•touch•the•iron•body•and•
the•power•cord•during•operation.
Do• not• leave• children• unattended• to• prevent•
using•the•unit•as•a•toy.
For•children•safety•reasons•do•not•leave•poly-
ethylene•bags,•used•as•packaging,•unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
Never• use• the• unit• if• the• power• plug• or• the•
power• cord• is• damaged,• if• the• iron• works•
improperly,•after•it• was•dropped•or• in•case• of•
leakage.
Do•not•attempt•to•repair•the•unit.•Do•not•dis-
assemble• the• unit• by• yourself,• if• any• mal-
function•is•detected•or•after•it•was•dropped,•
unplug•the•unit•and•apply• to• any• authorized•
service• center• from•the•contact•address•list•
given• in• the• warranty• certificate• and• on• the•
website•www.vitek.ru.
IM VT-1266.indd 4 20.05.2016 9:09:14
Скачать
Случайные обсуждения