Vitek VT-1225 G [7/46] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1225 G [7/46] English

Vitek VT-1225 G [7/46] English
7
E N G L I S H
Important information
- Vertical steaming is not recommended for
synthetic fabrics.
- To avoid fabric burning, do not touch it with
iron soleplate while steaming.
- Never steam clothes on a person as the
steam temperature is very high, use a
hangers or a stand.
- After you finish ironing, switch off the unit,
wait until it cools down completely, then
open the water inlet lid (2), turn over the iron
and drain the remaining water (pic. 8).
STEAM CHAMBER CLEANING
To prolong iron lifetime we recommend to clean
the steam chamber regularly, especially in the
regions with “hard” water.
– Set the continuous steam supply knob (3) to
the position «0» (steam supply is off).
– Fill the water tank (10) till the “MAX” mark (13).
– Place the iron on its base (8).
– Insert the power plug into the socket.
– Set the temperature control knob (11) to the
max. temperature, the pilot lamp (9) will light
up.
– When the soleplate temperature (14) reaches
the desired temperature value, the pilot lamp
(9) will go out. Wait till the soleplate is hot
again, then you can start cleaning the steam
chamber.
– Unplug the unit.
– Hold the iron above the sink horizontally,
press and hold the self-clean button (12)
(pic. 7).
– Boiling water and steam with scale will be
released from the iron soleplate (14) open-
ings.
– Slightly sway the iron back and forth, until
water goes out of the water tank (10).
– Place the iron on the base (8) and let it cool
down completely.
– Once the soleplate (14) cools down com-
pletely, wipe it with a dry cloth.
– Before you take the iron away for storage,
make sure that there is no water in the water
tank (10) and that iron soleplate (14) is com-
pletely dry.
CLEANING AND CARE
– Before cleaning the iron, make sure that it
is switched off and has cooled down com-
pletely.
– Wipe the unit body with a damp cloth and
then wipe dry.
– Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
– After removing scale, polish the soleplate
surface with a dry cloth.
– Do not use abrasive substances to clean the
soleplate and iron body.
– Avoid contact of iron soleplate with sharp
metal objects.
STORAGE
– Set the temperature control knob (11) to the
“MIN” position and the continuous steam
supply knob (3) to the position «0» (continu-
ous steam supply is off).
– Unplug the unit.
– Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (10) (pic. 8).
– Close the lid (2).
– Set the iron vertically and let it cool down
completely.
– Wind the power cord.
– Store the iron vertically in a dry cool place,
out of the reach of children.
DELIVERY SET
Iron – 1 pc.
Beaker – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICTAIONS
Power supply: 220-240 V, ~ 50 Hz
Power consumption: 2200 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (73/23 EEC)
VT-1225.indd 7 16.10.2012 15:35:39

Содержание

Похожие устройства

Скачать