![Gigabyte GA-H270M-DS3H [11/44] Center subwoofer speaker out orange](/img/pdf.png)
Gigabyte GA-H270M-DS3H [11/44] Center subwoofer speaker out orange
![Gigabyte GA-H270M-DS3H [11/44] Center subwoofer speaker out orange](/views2/1232945/page11/bgb.png)
HDMI Port
The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD
Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM
audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported
resolution is 4096x2160@24 Hz, but the actual resolutions supported are dependent on the monitor
being used.
USB 3.1 Gen 1 Port
TheUSB3.1Gen1portsupportstheUSB3.1Gen1specicationandiscompatibletotheUSB2.0
specication.UsethisportforUSBdevices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Center/Subwoofer Speaker Out (Orange)
Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.
Rear Speaker Out (Black)
Thisjackcanbeusedtoconnectrearspeakersina4/5.1/7.1-channelaudioconguration.
Side Speaker Out (Gray)
Usethisaudiojacktoconnectsidespeakersina7.1-channelaudioconguration.
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to
connectfrontspeakersina4/5.1/7.1-channelaudioconguration.
Mic In (Pink)
The Mic in jack.
• Tosetupatriple-displayconguration,youmustinstallmotherboarddriversintheoperating
systemrst.
• After installing the DisplayPort/HDMI device, make sure to set the default sound playback
device to DisplayPort/HDMI. (The item name may differ depending on your operating system.)
Activity LED
Connection/
Speed LED
LAN Port
Activity LED:Connection/Speed LED:
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
Please visit GIGABYTE's website for more software information.
- 11 -
Содержание
- Ga h270m ds3h 1
- Rev 1001 12me h27ms3h 1001r 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 0 3
- Chapter 3 appendix 8 3
- Ga h270m ds3h motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga h270m ds3h 4
- Ga h270m ds3h motherboard 5 two sata cables 4
- Ga h270m ds3h motherboard layout 4
- Motherboard driver disk 5 i o shield 4
- User s manual 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 9
- 4 installing the memory 9
- Dualchannelmemoryconfiguration 9
- Installing the cpu 9
- 5 installing an expansion card 10
- 6 back panel connectors 10
- D sub port 10
- Displayport 10
- Dvi d port 10
- Ps 2 keyboard mouse port 10
- Usb 2 1 port 10
- Center subwoofer speaker out orange 11
- Hdmi port 11
- Line in blue 11
- Line out green 11
- Mic in pink 11
- Rear speaker out black 11
- Rj 45 lan port 11
- Side speaker out gray 11
- Usb 3 gen 1 port 11
- 7 internal connectors 12
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 13
- 4 cpu_fan sys_fan1 2 3 fan headers 13
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 13
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 13
- Overheating overheating may result in damage to the cpu or the system may hang 13
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 13
- Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercapontheheaders 13
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 13
- With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 13
- Chipset 14
- Chipsetsupportsraid0 raid1 raid5 andraid10 refertochapter3 configuringaraidset forinstructionsonconfiguringaraid array 14
- Each sata express connector supports a single sata express device 14
- Follow the steps below to correctly install an m ssd in the m connector step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mounting hole forthem ssdtobeinstalledandthenscrewthenutfirst step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it with the screw 14
- M2a_32g m socket 3 connector 14
- Pin no definition 14
- Pleasenotethatanm pciessdcannotbeusedtocreatearaidseteitherwith anm satassdorasataharddriveandcanonlybeusedtobuildaraidsetwithuefi refer tochapter3 configuringaraidset forinstructionsonconfiguringaraidarray 14
- Sata express sata express connectors 14
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 14
- Select the proper hole for the m ssd to be installed and refasten the screw and nut 14
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 14
- Them connectorsupportsm satassdsandm pciessdsandsupportraidconfigurationthrough the inte 14
- Toenablehot pluggingforthesataports refertochapter2 biossetup peripherals sata andrstconfiguration formoreinformation 14
- Ci chassis intrusion header connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 15
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 15
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 15
- Due to the limited number of lanes provided by the chipset the availability of the sata connectors may be affected by the type of devices installed in the m2a_32g connector the m2a_32g connector shares bandwidth withthesata30connector refertothefollowingtablefordetails 15
- F_panel front panel header 15
- Hd hard drive activity led connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 15
- Installation notices for the m and sata connectors 15
- Nc no connection 15
- Pled pwr_led power led 15
- Pw power switch connects to the power switch on the chassis front panel you may configurethewaytoturnoffyoursystemusingthepowerswitch refer tochapter2 biossetup power formoreinformation 15
- Res resetswitch connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 15
- S3 s4 s5 off 15
- Speak speaker connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 15
- System status led 15
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 15
- F_audio front panel audio header 16
- Highdefinitionaudio hd andac 97audio youmayconnect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 16
- Of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 16
- Spdif_o s pdif out header 16
- The front panel audio header supports hd audio by default audio signals will be present on both of the front and back panel audio connections simultaneously some chassis provide a front panel audio module that has separated connectors on each wire instead 16
- The front panel audio header supports inte 16
- This header supports digital s pdif out and connects a s pdif digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards for example some graphics cards may require you to use a s pdif digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an hdmi display to the graphics card and have digital audio output from the hdmi display at the same time for information about connecting the s pdif digital audio cable carefully read the manual for your expansion card 16
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 17
- F_usb1 f_usb2 usb 2 1 headers 17
- F_usb30_1 f_usb30_2 usb 3 gen 1 headers 17
- From the power outlet to prevent damage to the usb bracket 17
- Theheadersconformtousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 17
- Theheadersconformtousb3 gen1 usb2 specificationandeachheadercanprovidetwousb ports forpurchasingtheoptional3 frontpanelthatprovidestwousb3 gen1ports pleasecontact the local dealer 17
- Com serial port header 18
- Lpt parallel port header 18
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 18
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 18
- Tpm trusted platform module header 18
- You may connect a tpm trusted platform module to this header 18
- Bat battery 19
- Clr_cmos clear cmos jumper 19
- 1 startup screen 20
- Chapter 2 bios setup 20
- 2 m i t 21
- C3 state support 22
- Core current limit amps 22
- Cpu enhanced halt c1e 22
- Cpu flex ratio override 22
- Cpu flex ratio settings 22
- Hyper threading technology 22
- Intel r speed shift technology inte 22
- Intel r turbo boost technology 22
- No of cpu cores enabled 22
- Power limit tdp watts power limit time 22
- Speed shift technology 22
- Turbo rati 22
- Uncore frequency 22
- Uncore ratio 22
- Adjacent cache line prefetch 23
- Allows you to specify the c state limit for the processor auto letsthebiosautomaticallyconfigurethis setting default auto 23
- C6 c7 state support 23
- C8 state support 23
- Cpu eist function 23
- Cpu thermal monitor 23
- Extremememoryprofile x m p 23
- Hardware prefetcher 23
- Package c state limit 23
- System memory multiplier 23
- Voltage optimization 23
- Advanced memory settings 24
- Channel interleaving 24
- Extremememoryprofile x m p 24
- Memory boot mode 24
- Memory enhancement settings 24
- Memory frequency mhz 24
- Memory multiplier tweaker 24
- Memory odd ratio 100 133 or 200 266 24
- Memory odd ratio 100 133 or 200 266 memory frequency mhz 24
- Memory timing mode 24
- Profileddrvoltage 24
- Rank interleaving 24
- System memory multiplier 24
- 3dmark01 enhancement 25
- Advanced power settings 25
- Advanced voltage settings 25
- Case open 25
- Channel a b memory sub timings 25
- Chipset voltage control 25
- Cpu core voltage control 25
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 25
- Cpu vcore loadline calibration 25
- Dram voltage control 25
- Max link speed 25
- Miscellaneous settings 25
- Pc health status 25
- Reset case open status 25
- Vaxg loadline calibration 25
- Fan control mode 26
- Fan control use temperature input 26
- Fan fail warning 26
- Fan speed 26
- Fan speed control 26
- Monitor 26
- Smart fan 5 settings 26
- Temperature 26
- Temperature interval 26
- Temperature warning control 26
- 3 system 27
- Access level 27
- System date 27
- System language 27
- System time 27
- 4 bios 28
- Boot option priorities 28
- Bootup numlock state 28
- Fast boot 28
- Full screen logo show 28
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 28
- Security option 28
- Csm support 29
- Lan pxe boot option rom 29
- Mouse speed 29
- Network stack driver support 29
- Next boot after ac power loss 29
- Ps2 devices support 29
- Sata support 29
- Usb support 29
- Vga support 29
- Windows 8 10 features 29
- Administrator password 30
- Other pci devices 30
- Secure boot 30
- Storage boot option control 30
- User password 30
- 5 peripherals 31
- Ambient led 31
- Ez raid 31
- Initial display output 31
- Intel platform trust technology ptt 31
- Offboardsatacontrollerconfiguration 31
- Onboard lan controller 31
- Trusted computing 31
- Aggressive lpm support 33
- Configureasesata 33
- Hot plug 33
- Mass storage devices 33
- Port 0 1 2 3 4 5 33
- Port 60 64 emulation 33
- Sata controller s 33
- Sata mode selection 33
- Sataandrstconfiguration 33
- 6 chipset 34
- Audio controller 34
- Dvmt pre allocated 34
- Dvmt total gfx mem 34
- High precision timer 34
- Internal graphics 34
- Ioapic 24 119 entries 34
- 7 power 35
- Ac back 35
- Dmi aspm 35
- Pch aspm 35
- Peg aspm 35
- Platform power management 35
- Power on by keyboard 35
- Power loading 36
- Power on by mouse 36
- Power on password 36
- Rc6 render standby 36
- Resume by alarm 36
- Soft off by pwr bttn 36
- 8 save exit 37
- Boot override 37
- Exit without saving 37
- Load optimized defaults 37
- Loadprofiles 37
- Save exit setup 37
- Saveprofiles 37
- 1 configuring a raid set 38
- 1 configuringaraidset 38
- A installing hard drives 38
- B configuringsatacontrollermodeinbiossetup 38
- Before you begin please prepare the following items 38
- C 1 using ez raid 38
- Chapter 3 appendix 38
- Configuringsatacontrollers 38
- Raid levels 38
- C 2 uefiraidconfiguration 39
- C 3 configuringlegacyraidrom 39
- Installing the operating system 40
- Installing the sata raid ahci driver and operating system 40
- 2 drivers installation 41
- Our commitment to preserving the environment 42
- Regulatory notices 42
- Regulatory statements 42
- Restriction of hazardous substances rohs directive statement 42
- Waste electrical electronic equipment weee directive statement 42
- Weee symbol statement 42
- Canada industry canada ic notices canada avis d industry canada ic 43
- Fcc notice u s a only 43
- Contact us 44
- Gigabyte esupport 44
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 44
Похожие устройства
- Gigabyte GA-H270N-WIFI Руководство по эксплуатации
- Inforce eh 9 tr Инструкция по эксплуатации
- Gigabyte GA-B150N-GSM Руководство пользователя
- Inforce dh 45 d Инструкция по эксплуатации
- Inforce eh 5 t Инструкция по эксплуатации
- Inforce dh 52 id Инструкция по эксплуатации
- Inforce dh 21 id Инструкция по эксплуатации
- Inforce eh 6 tr Инструкция по эксплуатации
- Inforce eh 3 tr Инструкция по эксплуатации
- Gigabyte GA-B250-D3A Руководство пользователя
- Inforce dh 30 d Инструкция по эксплуатации
- Inforce dh 15 d Инструкция по эксплуатации
- Gigabyte GA-B250-HD3 Руководство пользователя
- Gigabyte GA-B250-HD3P Руководство пользователя
- Gigabyte GA-B250M-D2V Руководство пользователя
- Gigabyte GA-B250M-D3H Руководство пользователя
- Gigabyte GA-B250M-D3V Руководство пользователя
- Gigabyte GA-B250M-DS3H Руководство пользователя
- Inforce gh 57 Инструкция по эксплуатации
- Gigabyte GA-B250M-HD3 Руководство пользователя