McCulloch m46-125r 9671744-01 [6/340] Filling with oil

McCulloch m46-125r 9671744-01 [6/340] Filling with oil
ASSEMBLING AND ADJUSTMENTS
6 – English
General
Handle
Assembly
Top handle
Place the handlebar’s tubular construction in direct
opposite to the lower part of the handlebar. Tighten the
knobs properly.
M46-125, M46-125R, M46-125RX, M46-140R, M51-
140R, M51-140RP
M40-125
Settings
Handle height (M46-125, M46-125R, M46-125RX, M46-
140R, M51-140R, M51-140RP)
Loosen the lower knobs.
Adjust the height. Tighten the knobs properly.
Cutting height
Move the lever to the back for higher cutting height and to
the front for lower cutting height.
M40-125 has four controls, one for each wheel.
Catcher
Fit the catcher bag.
Attach the hooks in the upper edge of the chassis.
Fit the bagger bottom in the discharge hole.
Mulcher insert
(M46-125RX, M51-140R, M51-140RP)
Raise the discharge guard to mount / dismount the
mulch plug.
Hook the spring in the frame.
Filling with oil
The oil tank is empty at delivery. Fill the oil slowly. See
instructions under the heading Maintenance. The
engine oil should be changed the first time after 5
hours running time.
!
IMPORTANT! Prevent unintentional
starting by removing the ignition cable
from the spark plug.
NOTICE! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.

Содержание

Похожие устройства

ASSEMBLING AND ADJUSTMENTS General Move the lever to the back for higher cutting height and to the front for lower cutting height IMPORTANT Prevent unintentional starting by removing the Ignition cable from the spark plug Handle Assembly M40 125 has four controls one for each wheel Top handle Catcher Place the handlebar s tubular construction in direct opposite to the lower part of the handlebar Tighten the knobs properly Fit the catcher bag M46 125 M46 125R M46 125RX M46 140R M51140R M51 140RP Attach the hooks in the upper edge of the chassis M40 125 Fit the bagger bottom in the discharge hole Mulcher insert M46 125RX M51 140R M51 140RP Raise the discharge guard to mount I dismount the mulch plug Settings Handle height M46 125 M46 125R M46 125RX M46140R M51 140R M51 140RP Loosen the lower knobs Adjust the height Tighten the knobs properly Cutting height NOTICE Do not set the cutting height too low as there is a risk that the cutters might hit ground with unevenness 6 English Filling with oil The oil tank is empty at delivery Fill the oil slowly See instructions under the heading Maintenance The engine oil should be changed the first time after 5 hours running time

Скачать
Случайные обсуждения