Upvel UP-316FEW — настройка PoE для портов: управление питанием и приоритетами [16/52]

Превью страниц Страница 16 / 52

UP-308FEW / UP-316FEW

PoE Setting

This page allows to configure the PoE function for each port.

Status Enable/disable PoE for selected ports.

Mode

Select AF or AT mode according to the PoE standard (802.3af or 802.3at)

supported by the device connected to the port. The port provides up to 15.4 watts

in AF mode and up to 30 watts in AT mode.

Priority

Select the priority (Low, High or Critical) of powering the devices through the

selected ports.

Power

Budget

The maximum power provided by each of the selected ports. The value specified

in this field is multiplied by 0.1, thus for 10 W you should enter 100.

Port No. Select the ports to which the settings should be applied.

All of the settings, excluding Mode, take effect immediately after clicking Update.

Changing the port mode requires reboot of the switch. After clicking Update the following

pop-up message appears:

Click OK to reboot the switch for the new settings to take effect.

User Manual 16