Upvel UP-236FEF — установка сетевого коммутатора: требования и рекомендации [6/20]

Превью страниц Страница 6 / 20

UP-236FEF

Installation

Installation Site Requirements

Ensure that the location where you plan to install the switch meets the

following requirements:

• Air temperature and humidity should be within the specified ranges.

See technical specifications on page 7.

• Vent holes in the switch housing should not be blocked. Make sure

that there is enough space around the switch for proper ventilation

and heat dissipation. Leave at least 10 cm (4 inches) of space at the

front and rear of the switch.

• The outlet should be close enough for the power cord to reach. The

length of the power cord supplied is 150 cm (59 inches).

• Desktop installation: place the switch on a sturdy, level surface

that can support at least 5 kg (11 lbs). For better stability, stick four

rubber feet to the bottom of the switch near the corners.

• Rack mounting: attach the brackets to the switch using the

included screws and then mount the switch on the 19-inch rack using

the screws provided with the rack.

Power connection

1. Connect one end of the power cord to the AC power connector on

the rear panel of the switch, and then connect the other end of the

power cord to an AC power outlet.

2. Check whether the Power LED is ON. When it is steady ON, it

indicates the power connection works properly.

4 Quick Installation Guide