Severin KV 8005 [22/82] Changing the water filter

Version 2 2011-12-01

8.2.5 Changing the water lter

For constant water quality, the water lter must be changed regularly.

NOTE!

If you change the water lter immediately after the display

of a cleaning message, steps 1 and 2 can be omitted.

1. Press the menu button for at least 3 seconds and use the e-Select to select the

CLEANING

menu option.

2. Then select the

USE FILTER

menu option and press the e-Select.

Â The display shows:

INSERT NEW WATER FILTER

3. Empty the water tank.

4. Place the insertion aid into the water lter (g. 12) and remove the water lter.

5. Use insertion aid to insert a new water lter (g. 13) and remove insertion aid

again.

6. Fill the water tank with cold drinking water and place the water tank back on the

device.

7. Press the e-Select.

Â The display shows:

RINSING

Â The lter change is complete as soon as the „Beverage selection“ view is

displayed again.

8.3 Cleaning the brewing unit

In addition to an integrated cleaning program, the device also offers you the opportu-

nity to clean the brewing unit manually. For this, the brewing unit can be removed as

follows:

1. Switch the device off and disconnect the plug.

2. Remove the water tank and shake out the remaining water.

Fig. 12: Inserting the insertion aid on water lter Fig. 13: Inserting the water lter