Kemppi KempArc SYN 500 [4/44] Environment
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kemppi KempArc SYN 500 [4/44] Environment

Kemppi KempArc SYN 500 [4/44] Environment
4
• Do not place the welding machine on a wet surface and do not work on a wet surface.
• Do not allow the mains cable to be directly exposed to water.
• Ensure cables or welding torches are not squashed by heavy objects and that they are not
exposed to sharp edges or a hot work piece.
• Make sure that faulty and damaged welding torches are changed immediately as they
can be lethal and may cause electrocution or re.
• Remember that the cable, plugs and other electric devices may be installed or replaced
only by an electrical contractor or engineer authorised to perform such operations.
• Turn o the welding machine when it is not in use.
• In the case of abnormal behaviour of the equipment, such as smoke coming from the
machine during normal use, take the machine to a Kemppi service representative for
inspection.
Welding power circuit
• Insulate yourself from the welding circuit by using dry and undamaged protective
clothing.
• Never touch the work piece and welding rod, welding wire, welding electrode or contact
tip at the same time.
• Do not put the welding torch or ground cable on the welding machine or other electric
equipment.
• Turn o the machine from the main switch always before you need to touch any
components of the electric circuit, for example when replacing the electrode or contact
tip or moving the earth return clamp.
Welding fumes
• Ensure proper ventilation and avoid inhaling the fumes.
• Ensure sucient supply of fresh air, particularly in closed spaces. You can also ensure the
supply of clean and sucient breathing air by using a fresh-air mask.
• Take extra precautions when working on metals or surface-treated materials containing
lead, cadmium, zinc, mercury or beryllium.
Transportation, lifting and suspension
• Pay attention to correct working position when lifting a heavy device – risk of injury to
the back.
• Never pull or lift the machine by the welding torch or other cables. Always use the lift
points or handles designed for that purpose.
• Only use a transport unit designed for the equipment.
• Try to transport the machine in an upright position, if possible.
• Never lift a gas cylinder and the welding machine at the same time. There are separate
provisions later for gas cylinder transportation.
• Never use a welding machine when suspended unless the suspension device has been
designed and approved for that particular purpose.
• Do not exceed the maximum allowed load of suspension beams or the transportation
trolley of welding equipment.
• It is recommended that the wire coil be removed during lifting or transportation.
Environment
• The welding power source is not suitable for use in rain or snow, although it can be used
and stored outdoors. Protect the equipment against rain and strong sunlight.
• Always store the machine in a dry and clean space.
• Protect the machine from sand and dust during use and in storage.
• The recommended operating temperature range is -20 to +40 °C. The machine’s operation
eciency decreases and it becomes more prone to damage if used in temperatures in
excess of 40 °C.

Содержание

Похожие устройства

Скачать