Timberk tgh 4200 x0 Инструкция по эксплуатации онлайн [7/24] 201172
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk tgh 4200 x0 Инструкция по эксплуатации онлайн [7/24] 201172

Timberk tgh 4200 x0 Инструкция по эксплуатации онлайн [7/24] 201172
www.timberk.com • gas heater
7
1. Regularly check the integrity of the gas hose between the gas pressure
reducer and gas valve of the appliance. If any damage of the hose is found,
operation of the appliance is prohibited and the hose should be replaced.
2. Regularly check all gas joints, pipes, and devices for gas leaks (using
soapy water). If any gas leak is found, immediately switch the heater off,
disconnect the gas cylinder, and contact the dealer or manufacturer’s
service center.
3. The appliance should be regularly washed to remove dust and dirt from
outer surfaces, since they affect efficiency of its operation and temperature
parameters of room heating. Before commencing preventive maintenance,
switch the appliance off and let the appliance cool down and then wipe its
surface with slightly wet soft rag.
4. Detergents including those containing abrasives in composition are not
recommended for washing. Exclude damage of the appliance with sharp
objects, since scratches on the painted surface may result in rusting.
5. The rear surface of the gas-fired heater also should be periodically
cleaned to remove dust and dirt. The procedure of preventive cleaning
should be carried out periodically to maintain the technical condition of the
heater and keep its appearance for long years.
8. MAINTENANCE
10. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
Transportation and
storage
From -30 °С to
+50 °С
From 15% to 85%
(without a condensate)
Upon completion of the service life, the heater should be disposed
according to the effective local regulations, rules, and methods. For more
details on disposal of the gas-fired heater, please contact a representative
of the local authority.
If you are not able to remedy a malfunction according to the recommen-
dations or other malfunctions occur, contact the authorized service center
of Timberk.
11. DISPOSAL
9. TROUBLESHOOTING
Troubleshooting Probable cause Remedy
Pilot light is lit evenly, but
goes out when you release
the gas control knob
Thermocouple wire is disconnected
from the gas valve
Connect the thermocouple to the gas valve
Incorrect position sensor
thermocouple relative to the pilot
burner
Adjust the position of the thermocouple
sensor in relation to the pilot burner so that
he was on fire
Pilot burner burns unevenly,
flame detached from the
base and goes off when you
release the gas control knob
Low gas quality is used Use a good quality gas
Faulty gearbox - too high or low gas
pressure
Contact an authorized service center Timberk
Strong ceramic burner flame Faulty gearbox - too high gas pressure Contact an authorized service center Timberk

Похожие устройства

Скачать