Hitachi DS12DVF3 — инструкция по установке сборки в корпус устройства [23/34]

Превью страниц Страница 23 / 34

--- 20 ---

(f) Install the assembly reassembled in step (1) and the assembly

reassembled in step (e) together. (See Fig. 16.)

Fit the projection on the Motor Spacer [24] into the recess in

the Rear Case [14] while ensuring that the Shift Knob [36] is

aligned with the positive side of the Motor [25] and turn the

Motor Spacer [24] clockwise when viewed from the rear of the

Motor [25] until it can turn no further. During installation, make

sure that the pinion press-fitted onto the shaft of the Motor [25]

and Planet Gear (A) Set [21] mesh properly.

Fig. 16

Projection

Recess

(4) Installation of the assembly reassembled in step (3) into Housing (A). (B) Set [30]

(a) Install the assembly reassembled in step (3) into housing (A). Note that the projections on the Front Case

[9] and the Motor Spacer [24] are engaged in the recesses in housing (A), and the projection on housing

(A) is engaged in the groove of the Clutch Dial [4]. (See Fig. 17.)

(b) Mount the Pushing Button [34] to housing (A). Check that the protrusion of the forward/reverse

changeover lever of the DC-Speed Control Switch [33] is inserted into the groove of the Pushing Button

[34].

Fig. 17