TSC TE200 — настройка принтера: восстановление заводских параметров [31/40]

Превью страниц Страница 31 / 40

Printer configuration will be restored to defaults as below after initialization.

Parameter Default setting

Speed 127 mm/sec (5 ips) (203DPI)

76 mm/sec (3 ips) (300DPI)

Density 8

Label Width

4" (101.5 mm)

Label Height

4" (101.5 mm)

Sensor Type Gap sensor

Gap Setting

0.12" (3.0 mm)

Print Direction 0

Reference Point 0,0 (upper left corner)

Offset 0

Tear Mode On

Peel off Mode Off

Cutter Mode Off

Code Page 850

Country Code 001

Clear Flash Memory No

4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor

Please follow the steps as below.

1. Turn off the power switch.

2. Hold on the button then turn on the power switch.

3. Release the button when LED turns green/amber after 5 green blinks. (Any green/amber will

do during the 5 blinks).

 The LED color will be changed as following:

Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5 blinks)

 red/amber (5 blinks)  solid green

4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor

Please follow the steps as below.

1. Turn off the power switch.

2. Hold on the button then turn on the power switch.

3. Release the button when LED turns red/amber after 5 green/amber blinks. (Any red/amber

will do during the 5 blinks).

 The LED color will be changed as following: