Thomson T32E53U [9/31] Advanced functions chapter 3
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Thomson T32E53U [9/31] Advanced functions chapter 3

Thomson T32E53U [9/31] Advanced functions chapter 3
You are recommended to use the Full screen mode.
Do not use the display mode with black bands on both
sides of the picture (such as Standard) for long time,
otherwise the TV screen may be damaged permanently.
Notes:
When Zoom is selected, you can press the left / right
direction button to zoom out / in the picture after exiting
from menu.
80
Standard
Full
50
50
50
50
0
Normal
Off
Off
BackLight
Picture Mode
Scale
Brightness
Contrast
Saturation
Sharpness
Color Temp
Natural Light
Dynamic Contrast
Tint
Picture
9
Swapping Two Channels
1. select the
Current Channel option and press the left or right
the
Target Channel option and press the left or right
the
Swap option and press the left, right
Press the up or down direction button to
direction button to select a channel number.
2. Press the up or down direction button to select
direction button to select the channel number to be
swapped.
3. Press the up or down direction button to select
direction or OK
button to swap.
Skipping a Channel
Advanced Functions
Chapter 3
General Operation
Adjusting the Picture
The menus for adjusting the picture are used to obtain the
best picture setting according to your preference, the type
of programme you are watching and the ambient lighting.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Picture icon and
press the or down direction or OK button to enter
the Picture menu. The Picture options are as below:
Back Light:
Picture Mode: use the direction or OK
through the picture preset
settings: Standard, Bright, Soft or ,
up
this option can be used to adjust the
brightness of the backlight, depending on room lighting.
Use the left or right direction button to adjust.
right button to
display the selectable options, then press the up or down
direction button to scroll
Personal and press
the right direction or OK button to confirm.
Note: When selecting Standard, Bright, Soft, the
Back Light will restore to the defaulted setting in
factory. You are recommended to use the Bright mode
for vivid palette.
If a channel was stored twice or its reception is poor, you
can simply skip it. The skipped channels can not be
selected by pressing the CH +/- buttons.
1. select the
Current Channel option and press the left or right
the
Skip option and press the left or right
Press the up or down direction button to
direction button to select the channel number to be
skipped.
2. Press the up or down direction button to select
direction button
to select Yes.
3. Press Menu to return or Exit to close the menu.
Note: Some options may be not available for certain
signal sources.
Scale: use the direction or OK
through the picture size: Standard, Full,
, Wide Screen, Zoom, Expand
button to display
the selectable options, then press the up or down direction
button to scroll
Subtitle
(Note: some options may be not selectable for
certain signal sources.) And press the right direction or OK
button to confirm.
right
Original and
Natural.
Press Menu to return or Exit to close the menu.
Note: Tint is available to be adjusted only when the
system of the video signal is NTSC.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between the light and
dark areas of the picture.
Saturation: adjusts the richness of color.
Sharpness: adjusts the crispness of the edges in the
picture.
Tint adjusts the balance between the red and green
levels.
:
Color Temp (Color Temperature): adjusts the color
temperature of the picture. Use the direction or OK
through
.
right
button to display the selectable options, then press the up
or down direction button to scroll the color settings:
Cool for a more blue palette of picture colors; Normal; and
Warm for a more red palette of picture colors
Natural Light : turns on this option to adjust the
brightness of the backlight according to the content of the
inputted signal automatically, so as to optimize the picture
quality and decrease the power consumption.
Dynamic Contrast: turns on this option to adjust the
contrast automatically.

Содержание

Похожие устройства

Скачать