Texas Smart Hedge 200 [16/20] Assembly

Assembly

The hedge trimmer is fully assembled in the box. Only the battery needs assembly.

Insert the battery

Hold the battery in one hand and insert in the

groove on the back of the product.

Check the battery is properly inserted before

use.

Starting up and how to use

The hedge trimmer is equipped with a two-step safety switch. The machine will only work

when the on/off switch in the handle (1) and on the front handle (2) are activated at the

same time. If one of the switches is released the blade will stop running.

Important work information

When a switch is released a short spark may appear from the engine.

This is not abnormal and should not lead to worries.

The spark is caused by the braking system that is build into the hedge trimmer.

Apart from hedges the hedge trimmer may also be used for cutting bushes.

The best cutting effect is achieved when holding the blade at an angle to the hedge of

approx. 15°.

The opposite rotating knives cut on both sides, and it is therefore possible to trim the

hedge in both directions.