Texas HTE620 [9/12] Description of the hedge trimmer

Description of the hedge trimmer

1. Blade

2. Safety protection guard

3. Front handle with on/off switch

4. Lock for turnable handle

5. On/off switch

6. Cable holder (see picture below)

7. Cable

Use

This hedge trimmer is made for cutting hedges and bushes. All other use that is not

specifically allowed in this manual may lead to manage to the hedge trimmer or injury to

the user.

Mounting of the safety protection guard

Warning! You may not use the hedge trimmer without

the safety protection guard.

Fit the safety protection guard over the blade and mount

it onto the side of the house using the screws delivered.

Important work information

When a switch is released a short spark may appear from the engine.

This is not abnormal and should not lead to worries.

The spark is caused by the braking system that is build into the hedge trimmer.

Apart from hedges the hedge trimmer may also be used for cutting bushes.

The best cutting effect is achieved when holding the blade at an angle to the hedge of

approx. 15°.

The opposite rotating knives cut on both sides, and it is therefore possible to trim the

hedge in both directions.

The sides of the hedge are trimmed using curve shaped movements from the bottom and

upwards.