Crunch 2160 [33/42] Connecting the power

5. When you want to connect power from your vehicle,

plug the small connector of the power cord into the 12-

voltDC power input jack located on the side of the

detector.

6. Plug the large adapter of the power cord into the

lighter socket of your vehicle.

Dashboard mounting

7. Select an area relatively level, clean, and dry. Adhere

one

part of the enclosed hook-and-loop fastener to this

area

and the other part to the bottom of the unit.

8. Fasten the unit to the area by placing the hook-and-

loop

pieces together.

Connecting the Power

The detector is designed to operate on most DC12V

negative ground vehicle electrical systems. The power cord

provided with the detector has a cigarette lighter socket plug

at one end and a small connector at the other.

1. Insert the small connector into the jack on the side of

the detector.

2. Insert the other end into the cigarette lighter socket of

your vehicle.

If the detector does not operate when you turn it on,

remove the adapter from the cigarette lighter socket and

carefully check the socket for debris. Also, check the fuse in

the adapter and your vehicle's fuse box.

Replacing the Fuse