Crunch 2140S [24/31] Installing the unit

Slot holds mounting bracket firmly.

INSTALLING THE UNIT

Mounting Guidelines

For the best performance, select the proper location for the detector where it

has a direct view of the road. Remember, the radar antenna and laser sensor

are located behind the rear panel of the unit. The antenna and sensors should

not be obstructed by metal or metallic surfaces and should be pointed at the

horizon for accurate long-range detection.

Choose a location that does not block the driver's vision.

Mount the detector in a level position.

Do not mount the detector behind the metal surfaces, windshield antenna,

wiper blades, and ornaments mirrored sunscreen.

Window tinting reduces the received strength of laser signals; do not mount

the detector behind tinted glass. Do not mount the detector where the driver

or passenger might hit in a sudden stop or accident.

Mounting Type

There are two ways of installation of CRUNCH laser/radar detector

Hook-and Loop Mounting

The hook-and-loop tape included with your detector might be the best

mounting method for some dashboards.

Follow these instructions to use the hook-and-loop

tape.

1. Use a damp cloth to thoroughly clean both the

bottom of the detector and the dashboard.

2. Peel off the tape's paper backing and apply the

tape to the bottom of the detector.

3. Remove the paper backing from the other side

of the tape and press the detector onto the

dashboard.

Windshield Mounting

The supplied windshield bracket and suction cups let