Crunch 2130 [30/38] Connecting the power

Follow these instructions to use the hook-and-loop tape.

1. Use a damp cloth to thoroughly

clean both the bottom of the detector

and the dashboard.

2. Peel off the tape's paper backing

and apply the tape to the bottom of

the detector.

3. Remove the paper backing from the

other side of the tape and press the

detector onto the dashboard.

Windshield Mounting

The supplied windshield bracket and suction cups let you

quickly mount the detector to your vehicle's windshield.

Follow these steps to use mounting bracket kit.

1. Install the suction cups onto the bracket by fitting them

into their holes.

2. Attach the bracket to windshield.

3. Attach Detector to bracket.

4. Bend bracket for correct detection angle (if necessary),

do not use the CRUNCH 2130 to bend bracket.

5. Plug power cord DC12V into detector.

6. Plug power cord into cigarette lighter.

Cautions: Some new models of cars have a plastic safety

coating which is applied to the windshield. The suction cups

may leave permanent marks on the windshield once they

are removed. Check vehicle owner's manual to see if your

car has the plastic safety coating.

Connecting the Power

The detector is designed to operate on most DC12V

negative ground vehicle electrical systems. The power cord