Crunch 211B Инструкция по эксплуатации онлайн [20/23] 23402

c. Laser detection will override all radar bands.

VG-2 Alerts

The VG-2, also known as a “radar detector detector”, is a special receiver used by police to

detect signals radiated by a radar detector.

When a VG-2 signal is detected, the alert is sounded and both ‘X’ and ‘K/Ka’ band

indicators will flash.

VG-2 Select Operation

Pressing both DIM and CITY buttons for three seconds, your CRUNCH will disengage VG-

2 feature with two beeps sound.

Pressing both DIM and CITY buttons again, your CRUNCH will engage VG-2 feature with

one beep sound. Factory default is ‘VG-2 On’.

Pulse Protection

Pulse (or instant-on) radar is more difficult to detect than conventional radar because it

remains “off” until activated to measure the speed of a targeted vehicle.

When a pulse type transmission is detected, your CRUNCH detector sounds an urgent

audio warning and flashes the Alert strength indicators at their fastest rate.

CARE AND MAINTENANCE

Your CRUNCH is an example of superior design and craftsmanship.

The following suggestions will help you to handle your detector in a proper way so you can

enjoy it for years.

Never leave the detector on the windshield or dashboard when you park your vehicle. The

temperature in the vehicle in summer can reach levels above what is considered to be safe

for this detector.

To make you less susceptible to break-in and theft, remove the detector from your

windshield or dashboard when you leave your vehicle.

Do not expose the detector to moisture. Rain dew, road splash, or other liquids can damage

the internal components and reduce sensitivity of the detector.

TROUBLESHOOTING

If the detector does not turn on:

1.Check the power cord. Be sure all power connectors are properly installed.

2.Check the fuse that controls power to the cigarette lighter socket. See your vehicles

owner's manual

3.The cigarette lighter socket might be dirty. Clean it with fine emery cloth to ensure a

good, clean connection.

4.Vehicle electrical problem exists.

5.Make sure that the volume control is in the ON position.

Caution: Do not place any metal object other than the cigarette lighter or a cigarette lighter

plug in the cigarette lighter socket.