Star Pro 60 [15/17] Operation of laser radar detector

• Do NOT mount behind windshield wipers, metal surfaces, ornaments, or mirrored

sunscreen glass, as these affect radar/laser signals.

Note: Tinted glass does not affect radar/laser signal reception.

• Mount the unit in a leveled position

• Avoid placing the unit in direct contact with windshield.

WINDSHIELD MOUNTING

• Attach the suction cups to the bracket.

• Push the bracket firmly onto the windshield.

• Attach the detector to the bracket and check

the angle.

• Plug power into the cigarette lighter then to

the detector.

DASHBOARD MOUNTING

• To place the detector on the dashboard, find a

location where the unit has a clear level view of the

road. Clean the dashboard and the lower part of the

detector with damp fabric.

• Remove paper backing from one side of the Velcro

fastener.

• Attach the pad to the dashboard at your chosen

location and remove the other paper backing.

• Attach the detector to the Velco fastener.

POWER CONNECTION

Your detector is designed to operate on most 12V DC negative ground vehicle electrical

system. The power cord provided with the unit has a cigarette lighter socket plug at one

end and a small connector on the other.

• Insert the small connector into the jack on the right side of the unit.

• Insert the other end into the cigarette lighter socket of your vehicle.

FUSE REPLACEMENT

If the detector does not operate when you turn it on, remove the power adapter from the

cigarette lighter or accessory outlet and carefully check the socket for debris. Also, check

the fuse in the adapter and your vehicles’ fuse box.

a) To replace the fuse, unscrew the top of the power adapter.

b) Remove and check the fuse to see if it has blown and then replace it.

OPERATION OF LASER/RADAR DETECTOR

A. POWER AND SELF-TEST

1. Rotate ON/OFF Volume Control Dial clockwise.

2. Each time you turn your Star PRO60 an automatic self-test sequence confirms that the

speaker and visual display are operational.