Star 2011 Инструкция по эксплуатации онлайн [18/24] 23480

Cautions: Some new models of cars have a plastic safety coating which is

applied to the windshield. The suction cups may leave permanent marks on

the windshield once they are removed. Check vehicle owner's manual to see

if your car has the plastic safety coating.

C. Connecting the Power

The detector is designed to operate on most DC12V negative ground vehicle

electrical systems. The power cord provided with the detector has a cigarette

lighter socket plug at one end and a small connector at the other.

1. Insert the small connector into the jack on the side of the detector.

2. Insert the other end into the cigarette lighter socket of your vehicle.

If the detector does not operate when you turn it on, remove the adapter from

the cigarette lighter socket and carefully check the socket for debris. Also, check

the fuse in the adapter and your vehicle's fuse box.

D. Replacing the Fuse

If the detector STAR stops operating, the fuse in the cigarette lighter plug

might be blown. If it has blown, follow these steps to replace it:

1. To replace the fuse, unscrew the top of the plug.

2. Remove the fuse and check the fuse to see if it has blown. If it has, replace it.

OPERATION OF LASER/RADAR-DETECTOR

A. Power and Self-test

To turn the detector on, connect power and turn the On/Off volume control

away from you until it clicks.

When powered up, the detector sounds a distinctive tone for each signal and

flashes all LEDs in sequence as a self-test.

Then all LEDs turn off except the power green LED.

B. Tutorial Mode

All STAR detectors have a tutorial mode. When the STAR is turned off, press

and hold the “Mute” button and turn the STAR on. The detector will enter the

tutorial mode. At this time the yellow City LED (C) will blink continuously.

Whenever you press the “Mute” button, the STAR 2040/50 will show the LED