Star 2011 Инструкция по эксплуатации онлайн [19/24] 23480

operation and sound for each band by turns. To exit the tutorial mode, press

“City” after finishing the one operation of a band.

C. Adjusting Volume

To change the detector's volume, turn volume control either away or toward

you (see figure 1).

D. Operating Settings

1. City Operation

In modern cities there are many weak signals which have no relation to the

traffic signal controllers. The City mode reduces the detector's sensitivity to weak

signals and eliminates responses to false sources.

It’s important to notice that old or poorly shielded detectors in other vehicles

can sometimes transmit weak radar signals. So don’t forget to switch on the City

mode where it is necessary.

•

To select the city mode, press CITY button. A yellow LED will blink.

•

Press CITY button again to switch off this mode. Highway mode will turn

on. Yellow button will stop blinking.

The Highway mode when the CITY LED turned off provides maximum

sensitivity for open road driving where there are no false signals but there is a

necessity to identify the traffic signal controllers beforehand.

2. Mute Operation

To temporarily silence the detector, press MUTE.

After leaving the area of the transmission source, the detector automatically

returns to normal after 20 seconds.

You can also press MUTE button while the audio alert is sounding to silence it.

E. Receiving and Identifying Radar and Laser Signals

When your detector identifies radar signals, the following will occur:

1. Distinctive audible alarms will be emitted for X-, Ku-, K-, and Ka-band radar

signals. The alarm sounds will occur faster and faster as the signal gets

stronger (as you get closer to the source).

When the signal gets very strong, the alarm sounds become continuous tones.

2. The appropriate visual alarm indicator (yellow X/Ku or red K/Ka-bands) will

flash in unison with the audio tones.

When the pulses of laser light from a laser gun are detected by your detector

1. The audible alarm will emit a distinctive sound for laser.

2. The amber “L” indicator will flash and start blinking.

3. Laser detection will override all radar bands.