Hyundai H-SWE1-50V-UI066 [5/29] Caution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hyundai H-SWE1-50V-UI066 [5/29] Caution

Hyundai H-SWE1-50V-UI066 [5/29] Caution
8.
Electrical instant water heater
9.
Electrical instant water heater
EN EN
mains. Perform cleaning or maintenance in accordance with the guidelines of this instruction
manual.
• Do not use hazardous chemicals for cleaning of the water heater and exclude their contact
with it.
Disposal
Upon expiration of service life, the water heater shall be disposed. For more details regarding
disposal of the water heater, please contact a representative of the local authorities.
Service life is about 10 years. Service life of the appliance is not equal to the warranty period.
INSTALLATION
CAUTION!
Refer to «Water heater safe operation and installation rules»
During installation of the water heater, rigorously observe the laws, regulations, directives, and
standards (safety requirements, disposal rules/procedure, electrical safety rules, etc.) eective in
your country, as well as directives of local electrical energy/water suppliers.
Mounting
Installation/connection safety and precautions
• Installation of the water heater in the operation place and arrangement of a power supply
line shall be performed by a specialized organization, representatives of the manufacturer’s
service department, or specialists having permits for installation of electrical equipment with
observation of the safety requirements.
• If the water heater installation/operation instructions are violated, the appliance is not subject
to warranty service and the manufacturer does not bear the responsibility.
• Never install the water heater outdoors.
• Before installation and connection of the water heater to the electrical mains, check and make
sure that the mains socket for the water heater has a grounding contact and it is properly
grounded. If there is no grounding loop in your electrical mains, operation of the water heater
is hazardous for life.
• Connect the water heater to 220 VAC / 50 Hz mains only. If necessary, clarify specications of
your electrical mains from the electrical energy suppliers.
• To avoid overheating and risk of re / damage of the internal electrical circuit, do not change
length of the power cord and do not connect the water heater via electrical extension cables.
• Make sure that the electrical cable does not cross sharp edges or contact with hot surfaces.
• To avoid air pockets and breakdown of the appliance, the water heater shall be installed strict-
ly in vertical position with its connections downward.
• Do not swap locations of the water inlet and outlet positions, since this will result in break-
down of the water heater and may inict harm to the user (see color marks - blue for water
inlet and red for water outlet).
Operation/cleaning safety and precautions
CAUTION!
Do not switch on the water heater, if water may freeze in it.
• The water heater is designed only for household use indoors in closed spaces. The water
heater is not designed for industrial use.
• The water heater is designed only for heating of water. Do not use the appliance for heating of
other liquids. This may inict a severe damage to the water heater, other property, or result in
a personal injury.
• Never switch on the water heater, if it is not lled with water or water cannot ow through the
pressure safely valve.
• Water temperature in the water heater may reach 75°C. Therefore, do not place body parts
under hot water upon rst switching of the water heater. For prevention of burns, properly
adjust outlet temperature of water.
• Do not remove the protection covers of the water heater during its operation or before
de-energization.
• Immediately disconnect the water heater from the electrical mains in case of strange sounds,
odor, or smoke from it.
• Do not use the water heater with the damaged electrical cable or other damages.
• For troubleshooting and repairs, please contact the nearest authorized service center of the
manufacturer in your region.
• Before cleaning or maintenance of the water heater, always disconnect it from the electrical
The electrical water heater shall be installed on a rm wall.
The wall planned for installation of the electrical water heater shall
be capable to bear at least double weight of the water heater fully
lled with water. The wall shall be free of cracks and other damages.
Otherwise, take measures to reinforce the mount or install the water
heater on a special support.
If the bathroom is too small, the water heater can be installed in
another place not exposed to direct sunlight and inaccessible for
moisture ingress. However for reduction of heat loss in pipes, the
installation place of the water heater shall be located as close as
possible to the hot water consumption point.
When selecting a location for the water heater, ensure free access
to it as follows: at least 60 cm between the bottom part of the water
heater and oor; at least 10 cm between the top part and ceiling.
This will ensure the maximum comfort for maintenance and adjust-
ment of the water heater, when necessary.
Aer you have selected the proper place for installation of the water
heater, mark points to make holes for the anchor bolts with hooks.
Drill two holes of appropriate depth in the wall using a drill with suit-
able size for the anchor bolts provided in the water heater package.
Aer that, insert the bolts to the drilled holes and rotate the hooks
of the bolts clockwise to securely tighten the nuts of the bolts. Then,
hang the water heater onto the hooks of the anchor bolts and check
security of mounting.

Содержание

Похожие устройства

Скачать