Hyundai H-AR10-07H [10/40] Sleep mode

Hyundai H-AR10-09H [10/40] Sleep mode
10.
Electric air conditioner (split system)
EN
24 hours. The air conditioner will switch on automatically in the set interval of time.
2. Press the Timer OFF button to activate Timer OFF. Each time you press the button you
increase the activation time by 30 minutes ranging from 0 to 10 hours and by 1 hour ranging
from 10 to 24 hours. The air conditioner will switch o automatically in the set interval of
time.
SLEEP mode
Using this button you may turn on or o the sleep mode. When the key pressed in the cooling
mode increases the temperature relative to the set at one degree per hour for two hours and
in heating mode lowers the temperature at two degrees per hour for two hours. Aer 7 hours
working in this mode, the air conditioner will turn o.
When the power is turned o, the sleep mode is automatically disabled.
Regulation of treated air ow direction
Regulating the position of deectors (blinds), set the direction of treated air ow ensuring
uniform distribution of temperature and the most comfort conditions in the room. To change
the position of deectors, use the «SWING» button.
8. MAINTENANCE
Before cleaning unplug the conditioner.
Cleaning of the indoor unit and remote control board:
Indoor unit and remote control board should be cleaned with a dry so cloth.
If the indoor unit is too unclean, moisten the cloth with cold water.
It is prohibited to clean the remote control board with moist cloth.
In order to avoid the damage of paint or details of the conditioner, do not clean it with brush-
es and do not leave them on the surface of indoor unit.
In order to avoid the damage of surface or deformation of the conditioner details, do not
clean it with petrol, solvents, cleaning powders or other chemically active substances.
Before a sustained interruption in the conditioner work:
Turn the conditioner on for several hours in the FAN mode. It will allow you to dry its inner
cavities
Unplug the conditioner. Remove the batteries from the remote control board. Checks before
starting:
Make sure that an air lter is installed.
Make sure that air inlet and outlet grilles of the outdoor unit are not blocked by foreign
objects.
Cleaning of air lter
Air lter cleans the air entering the conditioner from dust and foreign particles. If the lter is
contaminated, the conditioner capacity decreases sharply.
If the conditioner is operated permanently, the lter should be cleaned once per two weeks.
If the conditioner is installed in a room with dusty atmosphere, then the air lter should be
cleaned more oen.
To remove the lter, open the indoor unit panel.
Remove air lters. Clean the lter with a vacuum cleaner or rinse it in clean water. If the lter
is contaminated heavily, clean it with a so brush and wash in diluted washing solution, then
dry it in a cool place.
While cleaning the lter with the vacuum cleaner, hold it with contaminated surface up. While
washing the lter in water, hold it with contaminated surface down.
Do not dry the lter in the sun or near a re.
Set the air lter to initial position and close the panel.

Содержание

Похожие устройства

Скачать
Случайные обсуждения