Bosch GSA 10,8V-LI (060164L902) [20/260] Assembly
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch GSA 10,8V-LI (060164L902) [20/260] Assembly

Bosch GSA 10,8 V-LI Professional [20/260] Assembly
20 | English
1 619 P09 020 | (11.8.10) Bosch Power Tools
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 11.08.2010
Assembly
Battery Charging
f Use only the battery chargers listed on the
accessories page. Only these battery charg-
ers are matched to the lithium ion battery of
your power tool.
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, complete-
ly charge the battery in the battery charger be-
fore using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
The lithium ion battery is protected against
deep discharging by the “Electronic Cell Protec-
tion (ECP)”. When the battery is empty, the ma-
chine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Do not continue to press the
On/Off switch after the ma-
chine has been automatically switched off. The
battery can be damaged.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.
Removing the Battery (see figure A)
– To remove the battery 11 press the unlocking
buttons 5 and pull out the battery down-
wards. Do not exert any force.
Battery Charge-control Indication
The three green LEDs of the battery charge-con-
trol indicator 8 indicate the charge condition of
the battery 11.
– Press the On/Off switch 7 halfway or com-
pletely through to indicate the charge condi-
tion.
When no LED lights up after pressing the On/Off
switch 7, the battery is defective and must be
replaced.
Replacing/Inserting the Saw Blade
f Before any work on the power tool, remove
the battery.
f When mounting the saw blade, wear protec-
tive gloves. Danger of injury when touching
the saw blade.
f When changing the saw blade, take care
that the saw blade holder is free of material
residue, e. g. wood or metal shavings.
Selecting a Saw Blade
Use only saw blades suitable for the material be-
ing worked.
An overview of recommended saw blades can
be found at the beginning of these instructions.
Use only ½" universal shank saw blades. The
saw blade should not be longer than required
for the intended cut.
Use a thin saw blade for narrow curve cuts.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
WARNING
LED Capacity
Continuous lighting 3 x green
≥ 2/3
Continuous lighting 2 x green
≥ 1/3
Continuous lighting 1 x green
<1/3
Flashing light 1 x green
Reserve
OBJ_BUCH-1272-001.book Page 20 Wednesday, August 11, 2010 10:01 AM

Содержание

Похожие устройства

Скачать