Dell Inspiron 5567, 5567-1998 [70/108] Procedure

Replacing the touch pad

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

NOTE: Ensure that the touch pad is aligned with the guides available on

the palm-rest and keyboard assembly, and the gap on either sides of the

touch pad is equal.

1 Align the screw holes on the touch pad with the screw holes on the palm

rest and keyboard assembly.

2 Replace the screws that secure the touch pad to the palm rest and

keyboard assembly.

3 Adhere the status-light board cable to the touch pad.

4 Align the screw holes on the touch-pad bracket with the screw holes on

the palm rest and keyboard assembly.

5 Replace the screws that secure the touch-pad bracket to the palm rest

and keyboard assembly.

6 Adhere the tape that secures the touch pad to the palm rest and

keyboard assembly.

7 Slide both ends of the touch-pad cable into their respective connectors

and close the latches to secure the cable.

8 Slide the keyboard backlight cable into the connector and close the latch

to secure the cable.

Post-requisites

1 Replace the heat-sink assembly.

2 Replace the system-board assembly.

3 Replace the wireless card.

4 Replace the memory modules.