Philips GC4939/00 [6/18] English

Philips GC4939/00 [6/18] English
ENGLISH
10
Problem Possible cause Solution
The iron is not hot enough yet
to product steam.
Wait until the ‘iron ready’ light has
stopped breathing and lights up steadily.
Water droplets drips
onto the garment
during ironing.
You have used the steam
boost function too often
within a short period.
Continue ironing in horizontal position
and wait a while before you use the
steam boost function again.
You have not closed the water
tank lid properly.
Press the lid until you hear a ‘click’.
You have not insert the
Quick Calc Release collector
properly back to the appliance
(specic types only).
Stop ironing and let the iron cools down
for at least 1 hour. Take out the Quick
Calc Release collector. Insert it back into
the appliance and ensure the collector is
in-line with the surface of the appliance.
Push down the lever (“click”).
If the Quick Calc Release collector is
damaged, contact a consumer care
center in your country (see the world wide
guarantee leaet for contact details).
The iron does not
produce a steam
boost.
You have used the steam
boost function too often
within a short period.
Continue ironing in horizontal position
and wait a while before you use the
steam boost function again.
The iron is not hot enough for
ironing yet.
Wait until the ‘iron ready’ light has
stopped breathing and lights up steadily.
You have put a chemical into
the water tank.
Rinse the water tank and do not put any
perfume or chemicals into the water tank.
Dirty water and
impurities come
out of the soleplate
during ironing.
Hard water with impurities or
chemicals has formed akes
inside the soleplate.
Perform Quick Calc Release (specic
types only) or Calc-Clean (specic types
only).
See chapter “Cleaning and maintenance”.
Water drips from
the soleplate after
the iron has been
unplugged.
You have put the iron in
horizontal position with water
still left in the water tank.
Empty the water tank after use, or store
the iron in vertical position.
The steam slider is set to . Set the steam slider to .
There is an amber
light ashing on the
handle of the iron.
The Calc-Clean reminder light
is activated. This is to remind
you to perform calc clean.
Perform Quick Calc Release (specic
types only) or Calc-Clean (specic
types only). See chapter “Cleaning and
maintenance.
The iron leaves a
shine or an imprint on
the garment.
The surface to be ironed was
uneven, for instance because
you ironed over a seam or a
fold in the garment.
The iron is safe to use on all ironable
garments. The shine or imprint is not
permanent and disappears when you
wash the garment. Avoid ironing over
seams or folds. You can also place a
cotton cloth over the area to be ironed to
avoid imprints.
Скачать